change: 调整分区表,phy还是放在nvs里吧

luatos/partitions.16m_1mscript.csv

@@ -1,6 +1,5 @@
 # Name,   Type, SubType, Offset,  Size, Flags
-nvs,      data, nvs,     0x9000,    0x6000,
-phy_init, data, phy,     0xf000,    0x1000,
+nvs,      data, nvs,     0x9000,    0x7000,
 app0,     app,  ota_0,  0x10000,  0xEA0000,
 script,   0x5A, 0x5A,  0xEB0000,  0x100000,
 spiffs,   data, spiffs,0xFB0000,   0x40000,

luatos/partitions.16m_8mscript.csv

@@ -1,6 +1,5 @@
 # Name,   Type, SubType, Offset,  Size, Flags
-nvs,      data, nvs,     0x9000,    0x6000,
-phy_init, data, phy,     0xf000,    0x1000,
+nvs,      data, nvs,     0x9000,    0x7000,
 app0,     app,  ota_0,  0x10000,  0x7A0000,
 script,   0x5A, 0x5A,  0x7B0000,  0x800000,
 spiffs,   data, spiffs,0xFB0000,   0x40000,

luatos/partitions.2m.csv

@@ -1,6 +1,5 @@
 # Name,   Type, SubType, Offset,  Size, Flags
-nvs,      data, nvs,     0x9000,    0x6000,
-phy_init, data, phy,     0xf000,    0x1000,
+nvs,      data, nvs,     0x9000,    0x7000,
 app0,     app,  ota_0,  0x10000,  0x1A0000,
 script,   0x5A, 0x5A,  0x1B0000,   0x20000,
 spiffs,   data, spiffs,0x1D0000,   0x20000,

luatos/partitions.4m.csv

@@ -1,6 +1,5 @@
 # Name,   Type, SubType, Offset,  Size, Flags
-nvs,      data, nvs,     0x9000,    0x6000,
-phy_init, data, phy,     0xf000,    0x1000,
+nvs,      data, nvs,     0x9000,    0x7000,
 app0,     app,  ota_0,   0x10000, 0x380000,
 script,   0x5A, 0x5A,   0x390000,  0x20000,
 spiffs,   data, spiffs, 0x3B0000,  0x40000,

luatos/partitions.8m.csv

@@ -1,6 +1,5 @@
 # Name,   Type, SubType, Offset,  Size, Flags
-nvs,      data, nvs,     0x9000,    0x6000,
-phy_init, data, phy,     0xf000,    0x1000,
+nvs,      data, nvs,     0x9000,    0x7000,
 app0,     app,  ota_0,  0x10000,  0x780000,
 script,   0x5A, 0x5A,  0x790000,   0x20000,
 spiffs,   data, spiffs,0x7B0000,   0x40000,

luatos/sdkconfig.defaults.esp32c2

@@ -23,7 +23,6 @@ CONFIG_MONITOR_BAUD=921600
 CONFIG_XTAL_FREQ_26=y
 
 CONFIG_ESP_PHY_CALIBRATION_AND_DATA_STORAGE=y
-CONFIG_ESP_PHY_INIT_DATA_IN_PARTITION=y
 CONFIG_ESP_PHY_DEFAULT_INIT_IF_INVALID=y
 
 CONFIG_ESP_MAIN_TASK_STACK_SIZE=4096

luatos/sdkconfig.defaults.esp32c3

@@ -31,5 +31,4 @@ CONFIG_ESP_CONSOLE_UART_BAUDRATE=921600
 
 
 CONFIG_ESP_PHY_CALIBRATION_AND_DATA_STORAGE=y
-CONFIG_ESP_PHY_INIT_DATA_IN_PARTITION=y
 CONFIG_ESP_PHY_DEFAULT_INIT_IF_INVALID=y

luatos/sdkconfig.defaults.esp32s3

@@ -31,7 +31,6 @@ CONFIG_ESPTOOLPY_MONITOR_BAUD=921600
 
 
 CONFIG_ESP_PHY_CALIBRATION_AND_DATA_STORAGE=y
-CONFIG_ESP_PHY_INIT_DATA_IN_PARTITION=y
 CONFIG_ESP_PHY_DEFAULT_INIT_IF_INVALID=y
 
 CONFIG_ESP32S3_SPIRAM_SUPPORT=y