| 123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126 |
- /*
- @module w5500
- @summary w5500
- @version 1.0
- @date 2022.04.11
- */
- #include "luat_base.h"
- #ifdef LUAT_USE_W5500
- #include "luat_rtos.h"
- #include "luat_zbuff.h"
- #include "luat_spi.h"
- #define LUAT_LOG_TAG "w5500"
- #include "luat_log.h"
- #include "w5500_def.h"
- #include "luat_network_adapter.h"
- /*
- 初始化w5500
- @api w5500.init(spiid, speed, cs_pin, irq_pin, rst_pin, link_pin)
- @int spi通道号
- @int spi速度
- @int cs pin
- @int irq pin
- @int reset pin
- @usage
- w5500.init(spi.SPI_0, 24000000, pin.PB13, pin.PC08, pin.PC09)
- */
- static int l_w5500_init(lua_State *L){
- luat_spi_t spi = {0};
- spi.id = luaL_checkinteger(L, 1);
- spi.bandrate = luaL_checkinteger(L, 2);
- spi.cs = luaL_checkinteger(L, 3);
- spi.CPHA = 0;
- spi.CPOL = 0;
- spi.master = 1;
- spi.mode = 1;
- spi.dataw = 8;
- spi.bit_dict = 1;
- uint32_t irq_pin = luaL_checkinteger(L, 4);
- uint32_t reset_pin = luaL_checkinteger(L, 5);
- uint32_t link_pin = luaL_optinteger(L, 6, 0xff);
- w5500_init(&spi, irq_pin, reset_pin, link_pin);
- return 0;
- }
- /*
- w5500配置网络信息
- @api w5500.config(ip, submask, gateway, mac, RTR, RCR, speed)
- @string 静态ip地址,如果需要用DHCP获取,请写nil
- @string 子网掩码,如果使用动态ip,则忽略
- @string 网关,如果使用动态ip,则忽略
- @string MAC,写nil则通过MCU唯一码自动生成,如果要写,长度必须是6byte
- @int 重试间隔时间,默认2000,单位100us,不懂的不要改
- @int 最大重试次数,默认8,不懂的不要改
- @int 速度类型,目前只有0硬件配置,1自适应,默认为0
- @usage
- w5500.config("192.168.1.2", "255.255.255.0", "192.168.1.1", string.fromHex("102a3b4c5d6e"))
- */
- static int l_w5500_config(lua_State *L){
- if (!w5500_device_ready())
- {
- lua_pushboolean(L, 0);
- LLOGD("device no ready");
- return 1;
- }
- if (lua_isstring(L, 1))
- {
- size_t ip_len = 0;
- const char* ip = luaL_checklstring(L, 1, &ip_len);
- size_t mask_len = 0;
- const char* mask = luaL_checklstring(L, 2, &mask_len);
- size_t gateway_len = 0;
- const char* gateway = luaL_checklstring(L, 3, &gateway_len);
- w5500_set_static_ip(network_string_to_ipv4(ip, ip_len), network_string_to_ipv4(mask, mask_len), network_string_to_ipv4(gateway, gateway_len));
- }
- else
- {
- w5500_set_static_ip(0, 0, 0);
- }
- if (lua_isstring(L, 4))
- {
- size_t mac_len = 0;
- const char *mac = luaL_checklstring(L, 4, &mac_len);
- w5500_set_mac(mac);
- }
- w5500_set_param(luaL_optinteger(L, 5, 2000), luaL_optinteger(L, 6, 8), luaL_optinteger(L, 7, 0), 0);
- w5500_reset();
- lua_pushboolean(L, 1);
- return 1;
- }
- /*
- 将w5500注册进通用网络接口
- @api w5500.bind(network.xxx)
- @int 通用网络通道号
- @usage
- w5500.bind(network.ETH0)
- */
- static int l_w5500_network_register(lua_State *L){
- int index = luaL_checkinteger(L, 1);
- w5500_register_adapter(index);
- return 0;
- }
- #include "rotable2.h"
- static const rotable_Reg_t reg_w5500[] =
- {
- { "init", ROREG_FUNC(l_w5500_init)},
- { "config", ROREG_FUNC(l_w5500_config)},
- { "bind", ROREG_FUNC(l_w5500_network_register)},
- { NULL, ROREG_INT(0)}
- };
- LUAMOD_API int luaopen_w5500( lua_State *L ) {
- luat_newlib2(L, reg_w5500);
- return 1;
- }
- #endif
|