LuatOS/module/Air8000/demo/tf_card/pins_Air8000.json

{
  "model": "Air8000",
  "pins": [
    [1, "USB_BOOT", ""],
    [2, "VBUS", ""],
    [14, "PWR_KEY", ""],
    [16, "UART1_TXD", ""],
    [17, "UART1_RXD", ""],
    [18, "I2S_BCLK", ""],
    [19, "I2S_LRCK", ""],
    [20, "I2S_DIN", ""],
    [21, "I2S_DOUT", ""],
    [22, "I2S_MCLK", ""],
    [23, "GPIO20", ""],
    [24, "GPIO21", ""],
    [25, "LCD_CLK", ""],
    [26, "LCD_CS", ""],
    [27, "LCD_RST", ""],
    [28, "LCD_SDA", ""],
    [29, "LCD_RS", ""],
    [30, "GPIO2", ""],
    [31, "GPIO1", ""],
    [35, "CAN_STB", ""],
    [36, "CAN_TXD", ""],
    [37, "CAN_RXD", ""],
    [38, "SPI1_SCLK", "配置为spi1_sclk"],
    [39, "SPI1_MISO", "配置为spi1_miso"],
    [40, "SPI1_MOSI", "配置为spi1_mosi"],
    [41, "SPI1_CS", "配置为spi1_cs"],
    [43, "WAKEUP6", ""],
    [44, "WAKEUP0", ""],
    [46, "DBG_TXD", ""],
    [47, "DBG_RXD", ""],
    [48, "UART11_RXD", ""],
    [49, "UART11_TXD", ""],
    [52, "GPIO153", ""],
    [53, "GPIO147", ""],
    [54, "GPIO146", ""],
    [55, "GPIO141", ""],
    [56, "GPIO140", ""],
    [59, "UART12_RXD", ""],
    [60, "UART12_TXD", ""],
    [66, "I2C1_SCL", ""],
    [67, "I2C1_SDA", ""],
    [73, "GPIO162", ""],
    [74, "GPIO164", ""],
    [80, "I2C0_SCL", ""],
    [81, "I2C0_SDA", ""],
    [82, "GPIO17", ""],
    [83, "GPIO16", ""],
    [96, "GPIO160", ""],
    [98, "GPIO3", ""]
  ]
}