LuatOS/script/turnkey/hz201p/main.lua

-- LuaTools需要PROJECT和VERSION这两个信息
PROJECT = "HZ201P"
VERSION = "1.0.4"
log.info("main", PROJECT, VERSION)
-- 引入必要的库文件(lua编写), 内部库不需要require
sys = require "sys"
sysplus = require("sysplus")

-- mcu.hardfault(0)

local function fskvInit()
    fskv.init()
    local init = fskv.get("isInit")
    if init then
        return
    end
    fskv.set("allDone", false)
    fskv.set("pcbaDone", false)
    fskv.set("isInit", true)
end

fskvInit()

local allDone = fskv.get("allDone")

if allDone then

    -- 运营商给的dns经常抽风，手动指定
    socket.setDNS(nil, 1, "223.5.5.5")
    socket.setDNS(nil, 2, "119.29.29.29")

    pm.ioVol(pm.IOVOL_ALL_GPIO, 1800)
    -- gnss的备电和gsensor的供电
    local vbackup = gpio.setup(24, 1)
    -- gnss的供电
    local gpsPower = gpio.setup(26, 1)

    -- 使用合宙iot平台时需要这个参数
    PRODUCT_KEY = "YXdzIDo5QawWCIRywShMAKjmJsInXtsb" -- 到 iot.openluat.com 创建项目,获取正确的项目id
    libfota = require "libfota"
    function fota_cb(ret)
        log.info("fota", ret)
        if ret == 0 then
            rtos.reboot()
        end
    end
    -- 使用合宙iot平台进行升级
    sys.subscribe("IP_READY", function()
        libfota.request(fota_cb)
        sys.timerLoopStart(libfota.request, 3600000, fota_cb)
    end)

    -- 云平台逻辑
    require "cloud"

    -- 获取所有参数
    attributes = require "attributes"
    attributes.initial() -- 初始化

    -- gnss
    require "gnss"

    -- Gsensor
    require "da267"
    sys.subscribe("STEP_COUNTER", function(step)
        log.info("STEP_COUNTER", step)
        if step > 0 then
            attributes.set("step", step)
        end
    end)

    -- LED
    -- 全局状态变量
    _G_CONNECTED = false
    local blueLed = gpio.setup(1, 0)
    local redLed = gpio.setup(16, 0, nil, nil, 4)
    sys.taskInit(function()
        while true do
            if attributes.get("ledControl") then
                blueLed(attributes.get("blueLed") and 1 or 0)
                redLed(attributes.get("redLed") and 1 or 0)
                sys.wait(500)
            else
                redLed(attributes.get("isCharging") and 1 or 0)
                blueLed(1)
                sys.wait(_G_CONNECTED and 100 or 1000)
                blueLed(0)
                sys.wait(_G_CONNECTED and 100 or 1000)
            end
        end
    end)

    -- 关机键
    local powerTimer
    local powerKey = gpio.setup(46, function()
        log.info("powerKey", gpio.get(46))
        if gpio.get(46) == 0 then
            sys.publish("POWERKEY_PRESSED")
            powerTimer = sys.timerStart(function()
                log.info("powerKey", "long press")
                -- 把灯关都掉，让用户以为已经关机了
                blueLed(0)
                redLed(0)
                blueLed = function()
                end
                redLed = blueLed
                -- 两秒后真正关机
                sys.timerStart(pm.shutdown, 2000)
            end, 3000)
        else
            if powerTimer then
                sys.timerStop(powerTimer)
                log.info("powerKey", "stop press")
            end
        end
    end, gpio.PULLUP)

    -- 电量检测与上报
    require "battery"

    -- 信号值检测与上报
    sys.taskInit(function()
        while true do
            attributes.set("rsrp", mobile.rsrp())
            attributes.set("rsrq", mobile.rsrq())
            sys.wait(60000)
        end
    end)

    -- 拨打电话与音频
    require "ccVolte"

    -- SIM DETECT
    local simCheck = gpio.setup(41, function()
        log.info("sim status", gpio.get(41))
    end)

else
    require "test"
end
-- 用户代码已结束---------------------------------------------
-- 结尾总是这一句
sys.run()