-- LuaTools需要PROJECT和VERSION这两个信息
PROJECT = "sfuddemo"
VERSION = "1.0.0"

log.info("main", PROJECT, VERSION)

sys = require("sys")

--添加硬狗防止程序卡死
if wdt then
    wdt.init(9000)--初始化watchdog设置为9s
    sys.timerLoopStart(wdt.feed, 3000)--3s喂一次狗
end

-- spi_id,pin_cs
local function sfud_spi_pin()
    local rtos_bsp = rtos.bsp()
    if rtos_bsp == "AIR101" then
        return 0,pin.PB04
    elseif rtos_bsp == "AIR103" then
        return 0,pin.PB04
    elseif rtos_bsp == "AIR105" then
        return 5,pin.PC14
    elseif rtos_bsp == "ESP32C3" then
        return 2,7
    elseif rtos_bsp == "ESP32S3" then
        return 2,14
    elseif rtos_bsp == "EC618" then
        return 0,8
    elseif string.find(rtos_bsp,"EC718") then
        return 0,8
    else
        log.info("main", "bsp not support")
        return
    end
end

sys.taskInit(function()
    -- log.info("等5秒")
    sys.wait(1000)
    local spi_id,pin_cs = sfud_spi_pin() 
    if not spi_id then
        while 1 do
            sys.wait(1000)
            log.info("main", "bsp not support yet")
        end
    end

    log.info("sfud", "SPI", spi_id, "CS PIN", pin_cs)
    spi_flash = spi.deviceSetup(spi_id,pin_cs,0,0,8,20*1000*1000,spi.MSB,1,0)
    log.info("sfud", "spi_flash", spi_flash)
    local ret = sfud.init(spi_flash)
    if ret then
        log.info("sfud.init ok")
    else
        log.info("sfud.init Error")
        return
    end
    log.info("sfud.getDeviceNum",sfud.getDeviceNum())
    local sfud_device = sfud.getDeviceTable()

    if sfud.getInfo then
        log.info("sfud.getInfo", sfud.getInfo(sfud_device))
    end

    local test_sfud_raw = false
    local test_sfud_mount = true

    if test_sfud_raw then
        log.info("sfud.eraseWrite",sfud.eraseWrite(sfud_device,1024,"luatos-sfud1234567890123456789012345678901234567890"))
        log.info("sfud.read",sfud.read(sfud_device,1024,4))
    end
    
    if test_sfud_mount then
        local ret = sfud.mount(sfud_device,"/sfud")
        log.info("sfud.mount", ret)
        if ret then
            log.info("sfud", "挂载成功")
            log.info("fsstat", fs.fsstat("/sfud"))
            
            -- 挂载成功后，可以像操作文件一样操作
            local f = io.open("/sfud/test", "w")
            f:write(os.date())
            f:close()

            log.info("sfud", io.readFile("/sfud/test"))

            -- 文件追加
            os.remove("/sfud/test2")
            io.writeFile("/sfud/test2", "LuatOS")
            local f = io.open("/sfud/test2", "a+")
            f:write(" - " .. os.date())
            f:close()

            log.info("sfud", io.readFile("/sfud/test2"))
        else
            log.info("sfud", "挂载失败")
        end


    end
end)


-- 用户代码已结束---------------------------------------------
-- 结尾总是这一句
sys.run()
-- sys.run()之后后面不要加任何语句!!!!!