add:LCD复位后添加延迟确保复位完毕

components/lcd/luat_lcd_custom.c

@@ -31,7 +31,7 @@ static int custom_init(luat_lcd_conf_t* conf) {
     luat_gpio_set(conf->pin_rst, Luat_GPIO_LOW);
     luat_timer_mdelay(100);
     luat_gpio_set(conf->pin_rst, Luat_GPIO_HIGH);
-
+    luat_timer_mdelay(120);
     luat_lcd_wakeup(conf);
     luat_timer_mdelay(120);
     // 发送初始化命令

components/lcd/luat_lcd_gc9106l.c

@@ -30,7 +30,7 @@ static int gc9106l_init(luat_lcd_conf_t* conf) {
     luat_gpio_set(conf->pin_rst, Luat_GPIO_LOW);
     luat_timer_mdelay(100);
     luat_gpio_set(conf->pin_rst, Luat_GPIO_HIGH);
-
+    luat_timer_mdelay(120);
     // 发送初始化命令
     //------------------------------------gc9106lS Frame Rate-----------------------------------------//
     lcd_write_cmd(conf,0xFE);

components/lcd/luat_lcd_gc9306x.c

@@ -30,7 +30,7 @@ static int gc9306x_init(luat_lcd_conf_t* conf) {
     luat_gpio_set(conf->pin_rst, Luat_GPIO_LOW);
     luat_timer_mdelay(100);
     luat_gpio_set(conf->pin_rst, Luat_GPIO_HIGH);
-
+    luat_timer_mdelay(120);
     // 发送初始化命令
     lcd_write_cmd(conf,0xfe);
     lcd_write_cmd(conf,0xef);

components/lcd/luat_lcd_gc9a01.c

@@ -30,7 +30,7 @@ static int gc9a01_init(luat_lcd_conf_t* conf) {
     luat_gpio_set(conf->pin_rst, Luat_GPIO_LOW);
     luat_timer_mdelay(100);
     luat_gpio_set(conf->pin_rst, Luat_GPIO_HIGH);
-
+    luat_timer_mdelay(120);
     luat_lcd_wakeup(conf);
     luat_timer_mdelay(120);
     // 发送初始化命令

components/lcd/luat_lcd_ili9341.c

@@ -34,7 +34,7 @@ static int ili9341_init(luat_lcd_conf_t* conf) {
     luat_gpio_set(conf->pin_rst, Luat_GPIO_LOW);
     luat_timer_mdelay(100);
     luat_gpio_set(conf->pin_rst, Luat_GPIO_HIGH);
-
+    luat_timer_mdelay(120);
     // 发送初始化命令
     lcd_write_cmd(conf,0xCF);
     lcd_write_data(conf,0x00);

components/lcd/luat_lcd_ili9486.c

@@ -30,7 +30,7 @@ static int ili9486_init(luat_lcd_conf_t* conf) {
     luat_gpio_set(conf->pin_rst, Luat_GPIO_LOW);
     luat_timer_mdelay(100);
     luat_gpio_set(conf->pin_rst, Luat_GPIO_HIGH);
-
+    luat_timer_mdelay(120);
 
     // // 发送初始化命令
     lcd_write_cmd(conf,0xE0);

components/lcd/luat_lcd_ili9488.c

@@ -30,7 +30,7 @@ static int ili9488_init(luat_lcd_conf_t* conf) {
     luat_gpio_set(conf->pin_rst, Luat_GPIO_LOW);
     luat_timer_mdelay(100);
     luat_gpio_set(conf->pin_rst, Luat_GPIO_HIGH);
-
+    luat_timer_mdelay(120);
 
     // // 发送初始化命令
     lcd_write_cmd(conf,0xE0);

components/lcd/luat_lcd_st7735.c

@@ -30,7 +30,7 @@ static int st7735_init(luat_lcd_conf_t* conf) {
     luat_gpio_set(conf->pin_rst, Luat_GPIO_LOW);
     luat_timer_mdelay(100);
     luat_gpio_set(conf->pin_rst, Luat_GPIO_HIGH);
-
+    luat_timer_mdelay(120);
     // 发送初始化命令
     //------------------------------------ST7735S Frame Rate-----------------------------------------//
     lcd_write_cmd(conf,0xB1);

components/lcd/luat_lcd_st7735s.c

@@ -30,8 +30,8 @@ static int st7735s_init(luat_lcd_conf_t* conf) {
     luat_gpio_set(conf->pin_rst, Luat_GPIO_LOW);
     luat_timer_mdelay(100);
     luat_gpio_set(conf->pin_rst, Luat_GPIO_HIGH);
-    luat_timer_mdelay(100);
-
+    luat_timer_mdelay(120);
+	
 	lcd_write_cmd(conf,0x11);     //Sleep out
 	luat_timer_mdelay(120);                //Delay 120ms
 	lcd_write_cmd(conf,0xB1);     //Normal mode

components/lcd/luat_lcd_st7735v.c

@@ -30,7 +30,6 @@ static int st7735v_init(luat_lcd_conf_t* conf) {
     luat_gpio_set(conf->pin_rst, Luat_GPIO_LOW);
     luat_timer_mdelay(100);
     luat_gpio_set(conf->pin_rst, Luat_GPIO_HIGH);
-
     luat_timer_mdelay(120);//ms
 
     lcd_write_cmd(conf,0x11);

components/lcd/luat_lcd_st7789.c

@@ -30,6 +30,7 @@ static int st7789_init(luat_lcd_conf_t* conf) {
     luat_gpio_set(conf->pin_rst, Luat_GPIO_LOW);
     luat_timer_mdelay(100);
     luat_gpio_set(conf->pin_rst, Luat_GPIO_HIGH);
+    luat_timer_mdelay(120);
     // 发送初始化命令
     lcd_write_cmd(conf,0x11);
     luat_timer_mdelay(120);

components/lcd/luat_lcd_st7796.c

@@ -30,6 +30,7 @@ static int st7796_init(luat_lcd_conf_t* conf) {
     luat_gpio_set(conf->pin_rst, Luat_GPIO_LOW);
     luat_timer_mdelay(100);
     luat_gpio_set(conf->pin_rst, Luat_GPIO_HIGH);
+    luat_timer_mdelay(120);
     // 发送初始化命令
     lcd_write_cmd(conf,0x11);
     luat_timer_mdelay(120);
@@ -47,56 +48,106 @@ static int st7796_init(luat_lcd_conf_t* conf) {
     else if(conf->direction==3)lcd_write_data(conf,0xE8);
     /* RGB 5-6-5-bit  */
     lcd_write_cmd(conf,0x3A);
-    lcd_write_data(conf,0x05);
+    lcd_write_data(conf,0x55);
 
-    lcd_write_cmd(conf,0Xe8);
+    lcd_write_cmd(conf,0xB4);
+    lcd_write_data(conf,0x01);
+    lcd_write_cmd(conf,0xB7) ;
+    lcd_write_data(conf,0xC6) ;
+    lcd_write_cmd(conf,0xe8);
     lcd_write_data(conf,0x40);
-    lcd_write_data(conf,0x82);
-    lcd_write_data(conf,0x07);
-    lcd_write_data(conf,0x18);
-    lcd_write_data(conf,0x27);
-    lcd_write_data(conf,0x0a);
-    lcd_write_data(conf,0xb6);
+    lcd_write_data(conf,0x8a);
+    lcd_write_data(conf,0x00);
+    lcd_write_data(conf,0x00);
+    lcd_write_data(conf,0x29);
+    lcd_write_data(conf,0x19);
+    lcd_write_data(conf,0xa5);
     lcd_write_data(conf,0x33);
-
-    lcd_write_cmd(conf,0Xc5);
-    lcd_write_data(conf,0x27);
-
-    lcd_write_cmd(conf,0Xc2);
+    lcd_write_cmd(conf,0xc1);
+    lcd_write_data(conf,0x06);
+    lcd_write_cmd(conf,0xc2);
     lcd_write_data(conf,0xa7);
-
-    /* Positive Voltage Gamma Control */
-    lcd_write_cmd(conf,0xE0);
+    lcd_write_cmd(conf,0xc5);
+    lcd_write_data(conf,0x18);
+    lcd_write_cmd(conf,0xe0); //Positive Voltage Gamma Control
     lcd_write_data(conf,0xf0);
-    lcd_write_data(conf,0x01);
+    lcd_write_data(conf,0x09);
+    lcd_write_data(conf,0x0b);
     lcd_write_data(conf,0x06);
-    lcd_write_data(conf,0x0f);
-    lcd_write_data(conf,0x12);
-    lcd_write_data(conf,0x1d);
-    lcd_write_data(conf,0x36);
+    lcd_write_data(conf,0x04);
+    lcd_write_data(conf,0x15);
+    lcd_write_data(conf,0x2f);
     lcd_write_data(conf,0x54);
-    lcd_write_data(conf,0x44);
-    lcd_write_data(conf,0x0c);
+    lcd_write_data(conf,0x42);
+    lcd_write_data(conf,0x3c);
+    lcd_write_data(conf,0x17);
+    lcd_write_data(conf,0x14);
     lcd_write_data(conf,0x18);
-    lcd_write_data(conf,0x16);
-    lcd_write_data(conf,0x13);
-    lcd_write_data(conf,0x15);
-    /* Negative Voltage Gamma Control */
-    lcd_write_cmd(conf,0xE1);
+    lcd_write_data(conf,0x1b);
+    lcd_write_cmd(conf,0xe1); //Negative Voltage Gamma Control
     lcd_write_data(conf,0xf0);
-    lcd_write_data(conf,0x01);
-    lcd_write_data(conf,0x05);
-    lcd_write_data(conf,0x0a);
+    lcd_write_data(conf,0x09);
     lcd_write_data(conf,0x0b);
-    lcd_write_data(conf,0x07);
-    lcd_write_data(conf,0x32);
-    lcd_write_data(conf,0x44);
-    lcd_write_data(conf,0x44);
-    lcd_write_data(conf,0x0c);
-    lcd_write_data(conf,0x18);
-    lcd_write_data(conf,0x17);
-    lcd_write_data(conf,0x13);
+    lcd_write_data(conf,0x06);
+    lcd_write_data(conf,0x04);
+    lcd_write_data(conf,0x03);
+    lcd_write_data(conf,0x2d);
+    lcd_write_data(conf,0x43);
+    lcd_write_data(conf,0x42);
+    lcd_write_data(conf,0x3b);
     lcd_write_data(conf,0x16);
+    lcd_write_data(conf,0x14);
+    lcd_write_data(conf,0x17);
+    lcd_write_data(conf,0x1b);
+
+    // lcd_write_cmd(conf,0Xe8);
+    // lcd_write_data(conf,0x40);
+    // lcd_write_data(conf,0x82);
+    // lcd_write_data(conf,0x07);
+    // lcd_write_data(conf,0x18);
+    // lcd_write_data(conf,0x27);
+    // lcd_write_data(conf,0x0a);
+    // lcd_write_data(conf,0xb6);
+    // lcd_write_data(conf,0x33);
+
+    // lcd_write_cmd(conf,0Xc5);
+    // lcd_write_data(conf,0x27);
+
+    // lcd_write_cmd(conf,0Xc2);
+    // lcd_write_data(conf,0xa7);
+
+    // /* Positive Voltage Gamma Control */
+    // lcd_write_cmd(conf,0xE0);
+    // lcd_write_data(conf,0xf0);
+    // lcd_write_data(conf,0x01);
+    // lcd_write_data(conf,0x06);
+    // lcd_write_data(conf,0x0f);
+    // lcd_write_data(conf,0x12);
+    // lcd_write_data(conf,0x1d);
+    // lcd_write_data(conf,0x36);
+    // lcd_write_data(conf,0x54);
+    // lcd_write_data(conf,0x44);
+    // lcd_write_data(conf,0x0c);
+    // lcd_write_data(conf,0x18);
+    // lcd_write_data(conf,0x16);
+    // lcd_write_data(conf,0x13);
+    // lcd_write_data(conf,0x15);
+    // /* Negative Voltage Gamma Control */
+    // lcd_write_cmd(conf,0xE1);
+    // lcd_write_data(conf,0xf0);
+    // lcd_write_data(conf,0x01);
+    // lcd_write_data(conf,0x05);
+    // lcd_write_data(conf,0x0a);
+    // lcd_write_data(conf,0x0b);
+    // lcd_write_data(conf,0x07);
+    // lcd_write_data(conf,0x32);
+    // lcd_write_data(conf,0x44);
+    // lcd_write_data(conf,0x44);
+    // lcd_write_data(conf,0x0c);
+    // lcd_write_data(conf,0x18);
+    // lcd_write_data(conf,0x17);
+    // lcd_write_data(conf,0x13);
+    // lcd_write_data(conf,0x16);
 
     lcd_write_cmd(conf,0Xf0);
     lcd_write_data(conf,0x3c);