add:增加105 lcd/lvgl demo

demo/lcd/Air105/main.lua

@@ -0,0 +1,78 @@
+--- 模块功能：lcddemo
+-- @module lcd
+-- @author Dozingfiretruck
+-- @release 2021.01.25
+
+-- LuaTools需要PROJECT和VERSION这两个信息
+PROJECT = "lcddemo"
+VERSION = "1.0.0"
+
+log.info("main", PROJECT, VERSION)
+
+-- sys库是标配
+_G.sys = require("sys")
+
+--[[
+-- LCD接法示例, 以Air105开发板的HSPI为例
+LCD管脚       Air105管脚
+GND          GND
+VCC          3.3V
+SCL          (PC15/SPI0_SCK)
+SDA          (PC13/SPI0_MOSI)
+RES          (PC05)
+DC           (PC12)
+CS           (PC14)
+BL           (PC04)
+
+
+提示:
+1. 只使用SPI的时钟线(SCK)和数据输出线(MOSI), 其他均为GPIO脚
+2. 数据输入(MISO)和片选(CS), 虽然是SPI, 但已复用为GPIO, 并非固定,是可以自由修改成其他脚
+]]
+
+--添加硬狗防止程序卡死
+if wdt then
+    wdt.init(15000)--初始化watchdog设置为15s
+    sys.timerLoopStart(wdt.feed, 10000)--10s喂一次狗
+end
+
+-- v0006及以后版本可用pin方式, 请升级到最新固件 https://gitee.com/openLuat/LuatOS/releases
+spi_lcd = spi.deviceSetup(5,pin.PC14,0,0,8,96*1000*1000,spi.MSB,1,1)
+
+-- log.info("lcd.init",
+-- lcd.init("gc9a01",{port = "device",pin_dc = pin.PC12,pin_rst = pin.PC05,pin_pwr = pin.PC04,direction = 0,w = 240,h = 320,xoffset = 0,yoffset = 0},spi_lcd))
+-- log.info("lcd.init",
+-- lcd.init("st7789",{port = "device",pin_dc = pin.PC12, pin_rst = pin.PC05,pin_pwr = pin.PC04,direction = 0,w = 240,h = 240,xoffset = 0,yoffset = 0},spi_lcd))
+-- log.info("lcd.init",
+-- lcd.init("st7789",{port = "device",pin_dc = pin.PC12, pin_rst = pin.PC05,pin_pwr = pin.PC04,direction = 3,w = 240,h = 240,xoffset = 80,yoffset = 0},spi_lcd))
+-- log.info("lcd.init",
+-- lcd.init("st7789",{port = "device",pin_dc = pin.PC12, pin_rst = pin.PC05,pin_pwr = pin.PC04,direction = 3,w = 320,h = 240,xoffset = 0,yoffset = 0},spi_lcd))
+-- log.info("lcd.init",
+-- lcd.init("st7789",{port = "device",pin_dc = pin.PC12, pin_rst = pin.PC05,pin_pwr = pin.PC04,direction = 0,w = 240,h = 320,xoffset = 0,yoffset = 0},spi_lcd))
+-- log.info("lcd.init",
+-- lcd.init("st7735",{port = "device",pin_dc = pin.PC12, pin_rst = pin.PC05,pin_pwr = pin.PC04,direction = 0,w = 128,h = 160,xoffset = 2,yoffset = 1},spi_lcd))
+-- log.info("lcd.init",
+-- lcd.init("st7735v",{port = "device",pin_dc = pin.PC12,pin_rst = pin.PC05,pin_pwr = pin.PC04,direction = 1,w = 160,h = 80,xoffset = 0,yoffset = 24},spi_lcd))
+-- log.info("lcd.init",
+-- lcd.init("st7735s",{port = "device",pin_dc = pin.PC12,pin_rst = pin.PC05,pin_pwr = pin.PC04,direction = 2,w = 160,h = 80,xoffset = 1,yoffset = 26},spi_lcd))
+log.info("lcd.init",
+lcd.init("gc9306",{port = "device",pin_dc = pin.PC12,pin_rst = pin.PC05,pin_pwr = pin.PC04,direction = 0,w = 240,h = 320,xoffset = 0,yoffset = 0},spi_lcd))
+-- log.info("lcd.init",
+-- lcd.init("ili9341",{port = "device",pin_dc = pin.PC12, pin_rst = pin.PC05,pin_pwr = pin.PC04,direction = 0,w = 240,h = 320,xoffset = 0,yoffset = 0},spi_lcd))
+
+sys.taskInit(function()
+    -- sys.wait(1000)
+    -- API 文档 https://wiki.luatos.com/api/lcd.html
+    log.info("lcd.drawLine", lcd.drawLine(20,20,150,20,0x001F))
+    log.info("lcd.drawRectangle", lcd.drawRectangle(20,40,120,70,0xF800))
+    log.info("lcd.drawCircle", lcd.drawCircle(50,50,20,0x0CE0))
+    while 1 do
+        sys.wait(500)
+    end
+end)
+
+
+-- 用户代码已结束---------------------------------------------
+-- 结尾总是这一句
+sys.run()
+-- sys.run()之后后面不要加任何语句!!!!!

demo/lvgl/Air105/main.lua

@@ -0,0 +1,84 @@
+--- 模块功能：lvgldemo
+-- @module lvgl
+-- @author Dozingfiretruck
+-- @release 2021.01.25
+
+-- LuaTools需要PROJECT和VERSION这两个信息
+PROJECT = "lvgldemo"
+VERSION = "1.0.0"
+
+log.info("main", PROJECT, VERSION)
+
+-- sys库是标配
+_G.sys = require("sys")
+
+--[[
+-- LCD接法示例, 以Air105开发板的HSPI为例
+LCD管脚       Air105管脚
+GND          GND
+VCC          3.3V
+SCL          (PC15/SPI0_SCK)
+SDA          (PC13/SPI0_MOSI)
+RES          (PC05)
+DC           (PC12)
+CS           (PC14)
+BL           (PC04)
+
+
+提示:
+1. 只使用SPI的时钟线(SCK)和数据输出线(MOSI), 其他均为GPIO脚
+2. 数据输入(MISO)和片选(CS), 虽然是SPI, 但已复用为GPIO, 并非固定,是可以自由修改成其他脚
+]]
+
+--添加硬狗防止程序卡死
+wdt.init(15000)--初始化watchdog设置为15s
+sys.timerLoopStart(wdt.feed, 10000)--10s喂一次狗
+
+log.info("hello luatos")
+
+spi_lcd = spi.deviceSetup(5,pin.PC14,0,0,8,96*1000*1000,spi.MSB,1,1)
+
+-- log.info("lcd.init",
+-- lcd.init("gc9a01",{port = "device",pin_dc = pin.PC12,pin_rst = pin.PC05,pin_pwr = pin.PC04,direction = 0,w = 240,h = 320,xoffset = 0,yoffset = 0},spi_lcd))
+-- log.info("lcd.init",
+-- lcd.init("st7789",{port = "device",pin_dc = pin.PC12, pin_rst = pin.PC05,pin_pwr = pin.PC04,direction = 0,w = 240,h = 240,xoffset = 0,yoffset = 0},spi_lcd))
+-- log.info("lcd.init",
+-- lcd.init("st7789",{port = "device",pin_dc = pin.PC12, pin_rst = pin.PC05,pin_pwr = pin.PC04,direction = 3,w = 240,h = 240,xoffset = 80,yoffset = 0},spi_lcd))
+-- log.info("lcd.init",
+-- lcd.init("st7789",{port = "device",pin_dc = pin.PC12, pin_rst = pin.PC05,pin_pwr = pin.PC04,direction = 3,w = 320,h = 240,xoffset = 0,yoffset = 0},spi_lcd))
+-- log.info("lcd.init",
+-- lcd.init("st7789",{port = "device",pin_dc = pin.PC12, pin_rst = pin.PC05,pin_pwr = pin.PC04,direction = 0,w = 240,h = 320,xoffset = 0,yoffset = 0},spi_lcd))
+-- log.info("lcd.init",
+-- lcd.init("st7735",{port = "device",pin_dc = pin.PC12, pin_rst = pin.PC05,pin_pwr = pin.PC04,direction = 0,w = 128,h = 160,xoffset = 2,yoffset = 1},spi_lcd))
+-- log.info("lcd.init",
+-- lcd.init("st7735v",{port = "device",pin_dc = pin.PC12,pin_rst = pin.PC05,pin_pwr = pin.PC04,direction = 1,w = 160,h = 80,xoffset = 0,yoffset = 24},spi_lcd))
+-- log.info("lcd.init",
+-- lcd.init("st7735s",{port = "device",pin_dc = pin.PC12,pin_rst = pin.PC05,pin_pwr = pin.PC04,direction = 2,w = 160,h = 80,xoffset = 1,yoffset = 26},spi_lcd))
+log.info("lcd.init",
+lcd.init("gc9306",{port = "device",pin_dc = pin.PC12,pin_rst = pin.PC05,pin_pwr = pin.PC04,direction = 0,w = 240,h = 320,xoffset = 0,yoffset = 0},spi_lcd))
+-- log.info("lcd.init",
+-- lcd.init("ili9341",{port = "device",pin_dc = pin.PC12, pin_rst = pin.PC05,pin_pwr = pin.PC04,direction = 0,w = 240,h = 320,xoffset = 0,yoffset = 0},spi_lcd))
+
+
+log.info("lvgl", lvgl.init())
+lvgl.disp_set_bg_color(nil, 0xFFFFFF)
+local scr = lvgl.obj_create(nil, nil)
+local btn = lvgl.btn_create(scr)
+lvgl.obj_align(btn, lvgl.scr_act(), lvgl.ALIGN_CENTER, 0, 0)
+local label = lvgl.label_create(btn)
+lvgl.label_set_text(label, "LuatOS!")
+lvgl.scr_load(scr)
+
+sys.taskInit(function()
+    while 1 do
+        sys.wait(500)
+    end
+end)
+
+
+-- 用户代码已结束---------------------------------------------
+-- 结尾总是这一句
+sys.run()
+-- sys.run()之后后面不要加任何语句!!!!!
+
+