|
|
@@ -1,2831 +0,0 @@
|
|
|
-/**
|
|
|
- * \file config.h
|
|
|
- *
|
|
|
- * \brief Configuration options (set of defines)
|
|
|
- *
|
|
|
- * This set of compile-time options may be used to enable
|
|
|
- * or disable features selectively, and reduce the global
|
|
|
- * memory footprint.
|
|
|
- */
|
|
|
-/*
|
|
|
- * Copyright (C) 2006-2015, ARM Limited, All Rights Reserved
|
|
|
- * SPDX-License-Identifier: Apache-2.0
|
|
|
- *
|
|
|
- * Licensed under the Apache License, Version 2.0 (the "License"); you may
|
|
|
- * not use this file except in compliance with the License.
|
|
|
- * You may obtain a copy of the License at
|
|
|
- *
|
|
|
- * http://www.apache.org/licenses/LICENSE-2.0
|
|
|
- *
|
|
|
- * Unless required by applicable law or agreed to in writing, software
|
|
|
- * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
|
|
|
- * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
|
|
- * See the License for the specific language governing permissions and
|
|
|
- * limitations under the License.
|
|
|
- *
|
|
|
- * This file is part of mbed TLS (https://tls.mbed.org)
|
|
|
- */
|
|
|
-
|
|
|
-#ifndef MBEDTLS_CONFIG_H
|
|
|
-#define MBEDTLS_CONFIG_H
|
|
|
-
|
|
|
-#if defined(_MSC_VER) && !defined(_CRT_SECURE_NO_DEPRECATE)
|
|
|
-#define _CRT_SECURE_NO_DEPRECATE 1
|
|
|
-#endif
|
|
|
-
|
|
|
-/**
|
|
|
- * \name SECTION: System support
|
|
|
- *
|
|
|
- * This section sets system specific settings.
|
|
|
- * \{
|
|
|
- */
|
|
|
-
|
|
|
-/**
|
|
|
- * \def MBEDTLS_HAVE_ASM
|
|
|
- *
|
|
|
- * The compiler has support for asm().
|
|
|
- *
|
|
|
- * Requires support for asm() in compiler.
|
|
|
- *
|
|
|
- * Used in:
|
|
|
- * library/timing.c
|
|
|
- * library/padlock.c
|
|
|
- * include/mbedtls/bn_mul.h
|
|
|
- *
|
|
|
- * Comment to disable the use of assembly code.
|
|
|
- */
|
|
|
-#define MBEDTLS_HAVE_ASM
|
|
|
-
|
|
|
-/**
|
|
|
- * \def MBEDTLS_NO_UDBL_DIVISION
|
|
|
- *
|
|
|
- * The platform lacks support for double-width integer division (64-bit
|
|
|
- * division on a 32-bit platform, 128-bit division on a 64-bit platform).
|
|
|
- *
|
|
|
- * Used in:
|
|
|
- * include/mbedtls/bignum.h
|
|
|
- * library/bignum.c
|
|
|
- *
|
|
|
- * The bignum code uses double-width division to speed up some operations.
|
|
|
- * Double-width division is often implemented in software that needs to
|
|
|
- * be linked with the program. The presence of a double-width integer
|
|
|
- * type is usually detected automatically through preprocessor macros,
|
|
|
- * but the automatic detection cannot know whether the code needs to
|
|
|
- * and can be linked with an implementation of division for that type.
|
|
|
- * By default division is assumed to be usable if the type is present.
|
|
|
- * Uncomment this option to prevent the use of double-width division.
|
|
|
- *
|
|
|
- * Note that division for the native integer type is always required.
|
|
|
- * Furthermore, a 64-bit type is always required even on a 32-bit
|
|
|
- * platform, but it need not support multiplication or division. In some
|
|
|
- * cases it is also desirable to disable some double-width operations. For
|
|
|
- * example, if double-width division is implemented in software, disabling
|
|
|
- * it can reduce code size in some embedded targets.
|
|
|
- */
|
|
|
-//#define MBEDTLS_NO_UDBL_DIVISION
|
|
|
-
|
|
|
-/**
|
|
|
- * \def MBEDTLS_HAVE_SSE2
|
|
|
- *
|
|
|
- * CPU supports SSE2 instruction set.
|
|
|
- *
|
|
|
- * Uncomment if the CPU supports SSE2 (IA-32 specific).
|
|
|
- */
|
|
|
-//#define MBEDTLS_HAVE_SSE2
|
|
|
-
|
|
|
-/**
|
|
|
- * \def MBEDTLS_HAVE_TIME
|
|
|
- *
|
|
|
- * System has time.h and time().
|
|
|
- * The time does not need to be correct, only time differences are used,
|
|
|
- * by contrast with MBEDTLS_HAVE_TIME_DATE
|
|
|
- *
|
|
|
- * Defining MBEDTLS_HAVE_TIME allows you to specify MBEDTLS_PLATFORM_TIME_ALT,
|
|
|
- * MBEDTLS_PLATFORM_TIME_MACRO, MBEDTLS_PLATFORM_TIME_TYPE_MACRO and
|
|
|
- * MBEDTLS_PLATFORM_STD_TIME.
|
|
|
- *
|
|
|
- * Comment if your system does not support time functions
|
|
|
- */
|
|
|
-#define MBEDTLS_HAVE_TIME
|
|
|
-
|
|
|
-/**
|
|
|
- * \def MBEDTLS_HAVE_TIME_DATE
|
|
|
- *
|
|
|
- * System has time.h and time(), gmtime() and the clock is correct.
|
|
|
- * The time needs to be correct (not necesarily very accurate, but at least
|
|
|
- * the date should be correct). This is used to verify the validity period of
|
|
|
- * X.509 certificates.
|
|
|
- *
|
|
|
- * Comment if your system does not have a correct clock.
|
|
|
- */
|
|
|
-// #define MBEDTLS_HAVE_TIME_DATE
|
|
|
-
|
|
|
-/**
|
|
|
- * \def MBEDTLS_PLATFORM_MEMORY
|
|
|
- *
|
|
|
- * Enable the memory allocation layer.
|
|
|
- *
|
|
|
- * By default mbed TLS uses the system-provided calloc() and free().
|
|
|
- * This allows different allocators (self-implemented or provided) to be
|
|
|
- * provided to the platform abstraction layer.
|
|
|
- *
|
|
|
- * Enabling MBEDTLS_PLATFORM_MEMORY without the
|
|
|
- * MBEDTLS_PLATFORM_{FREE,CALLOC}_MACROs will provide
|
|
|
- * "mbedtls_platform_set_calloc_free()" allowing you to set an alternative calloc() and
|
|
|
- * free() function pointer at runtime.
|
|
|
- *
|
|
|
- * Enabling MBEDTLS_PLATFORM_MEMORY and specifying
|
|
|
- * MBEDTLS_PLATFORM_{CALLOC,FREE}_MACROs will allow you to specify the
|
|
|
- * alternate function at compile time.
|
|
|
- *
|
|
|
- * Requires: MBEDTLS_PLATFORM_C
|
|
|
- *
|
|
|
- * Enable this layer to allow use of alternative memory allocators.
|
|
|
- */
|
|
|
-#define MBEDTLS_PLATFORM_MEMORY
|
|
|
-
|
|
|
-/**
|
|
|
- * \def MBEDTLS_PLATFORM_NO_STD_FUNCTIONS
|
|
|
- *
|
|
|
- * Do not assign standard functions in the platform layer (e.g. calloc() to
|
|
|
- * MBEDTLS_PLATFORM_STD_CALLOC and printf() to MBEDTLS_PLATFORM_STD_PRINTF)
|
|
|
- *
|
|
|
- * This makes sure there are no linking errors on platforms that do not support
|
|
|
- * these functions. You will HAVE to provide alternatives, either at runtime
|
|
|
- * via the platform_set_xxx() functions or at compile time by setting
|
|
|
- * the MBEDTLS_PLATFORM_STD_XXX defines, or enabling a
|
|
|
- * MBEDTLS_PLATFORM_XXX_MACRO.
|
|
|
- *
|
|
|
- * Requires: MBEDTLS_PLATFORM_C
|
|
|
- *
|
|
|
- * Uncomment to prevent default assignment of standard functions in the
|
|
|
- * platform layer.
|
|
|
- */
|
|
|
-//#define MBEDTLS_PLATFORM_NO_STD_FUNCTIONS
|
|
|
-
|
|
|
-/**
|
|
|
- * \def MBEDTLS_PLATFORM_EXIT_ALT
|
|
|
- *
|
|
|
- * MBEDTLS_PLATFORM_XXX_ALT: Uncomment a macro to let mbed TLS support the
|
|
|
- * function in the platform abstraction layer.
|
|
|
- *
|
|
|
- * Example: In case you uncomment MBEDTLS_PLATFORM_PRINTF_ALT, mbed TLS will
|
|
|
- * provide a function "mbedtls_platform_set_printf()" that allows you to set an
|
|
|
- * alternative printf function pointer.
|
|
|
- *
|
|
|
- * All these define require MBEDTLS_PLATFORM_C to be defined!
|
|
|
- *
|
|
|
- * \note MBEDTLS_PLATFORM_SNPRINTF_ALT is required on Windows;
|
|
|
- * it will be enabled automatically by check_config.h
|
|
|
- *
|
|
|
- * \warning MBEDTLS_PLATFORM_XXX_ALT cannot be defined at the same time as
|
|
|
- * MBEDTLS_PLATFORM_XXX_MACRO!
|
|
|
- *
|
|
|
- * Requires: MBEDTLS_PLATFORM_TIME_ALT requires MBEDTLS_HAVE_TIME
|
|
|
- *
|
|
|
- * Uncomment a macro to enable alternate implementation of specific base
|
|
|
- * platform function
|
|
|
- */
|
|
|
-//#define MBEDTLS_PLATFORM_TIME_ALT
|
|
|
-
|
|
|
-/**
|
|
|
- * \def MBEDTLS_DEPRECATED_WARNING
|
|
|
- *
|
|
|
- * Mark deprecated functions so that they generate a warning if used.
|
|
|
- * Functions deprecated in one version will usually be removed in the next
|
|
|
- * version. You can enable this to help you prepare the transition to a new
|
|
|
- * major version by making sure your code is not using these functions.
|
|
|
- *
|
|
|
- * This only works with GCC and Clang. With other compilers, you may want to
|
|
|
- * use MBEDTLS_DEPRECATED_REMOVED
|
|
|
- *
|
|
|
- * Uncomment to get warnings on using deprecated functions.
|
|
|
- */
|
|
|
-//#define MBEDTLS_DEPRECATED_WARNING
|
|
|
-
|
|
|
-/**
|
|
|
- * \def MBEDTLS_DEPRECATED_REMOVED
|
|
|
- *
|
|
|
- * Remove deprecated functions so that they generate an error if used.
|
|
|
- * Functions deprecated in one version will usually be removed in the next
|
|
|
- * version. You can enable this to help you prepare the transition to a new
|
|
|
- * major version by making sure your code is not using these functions.
|
|
|
- *
|
|
|
- * Uncomment to get errors on using deprecated functions.
|
|
|
- */
|
|
|
-#define MBEDTLS_DEPRECATED_REMOVED
|
|
|
-
|
|
|
-/* \} name SECTION: System support */
|
|
|
-
|
|
|
-/**
|
|
|
- * \name SECTION: mbed TLS feature support
|
|
|
- *
|
|
|
- * This section sets support for features that are or are not needed
|
|
|
- * within the modules that are enabled.
|
|
|
- * \{
|
|
|
- */
|
|
|
-
|
|
|
-/**
|
|
|
- * \def MBEDTLS_TIMING_ALT
|
|
|
- *
|
|
|
- * Uncomment to provide your own alternate implementation for mbedtls_timing_hardclock(),
|
|
|
- * mbedtls_timing_get_timer(), mbedtls_set_alarm(), mbedtls_set/get_delay()
|
|
|
- *
|
|
|
- * Only works if you have MBEDTLS_TIMING_C enabled.
|
|
|
- *
|
|
|
- * You will need to provide a header "timing_alt.h" and an implementation at
|
|
|
- * compile time.
|
|
|
- */
|
|
|
-//#define MBEDTLS_TIMING_ALT
|
|
|
-
|
|
|
-/**
|
|
|
- * \def MBEDTLS_AES_ALT
|
|
|
- *
|
|
|
- * MBEDTLS__MODULE_NAME__ALT: Uncomment a macro to let mbed TLS use your
|
|
|
- * alternate core implementation of a symmetric crypto, an arithmetic or hash
|
|
|
- * module (e.g. platform specific assembly optimized implementations). Keep
|
|
|
- * in mind that the function prototypes should remain the same.
|
|
|
- *
|
|
|
- * This replaces the whole module. If you only want to replace one of the
|
|
|
- * functions, use one of the MBEDTLS__FUNCTION_NAME__ALT flags.
|
|
|
- *
|
|
|
- * Example: In case you uncomment MBEDTLS_AES_ALT, mbed TLS will no longer
|
|
|
- * provide the "struct mbedtls_aes_context" definition and omit the base
|
|
|
- * function declarations and implementations. "aes_alt.h" will be included from
|
|
|
- * "aes.h" to include the new function definitions.
|
|
|
- *
|
|
|
- * Uncomment a macro to enable alternate implementation of the corresponding
|
|
|
- * module.
|
|
|
- *
|
|
|
- * \warning MD2, MD4, MD5, ARC4, DES and SHA-1 are considered weak and their
|
|
|
- * use constitutes a security risk. If possible, we recommend
|
|
|
- * avoiding dependencies on them, and considering stronger message
|
|
|
- * digests and ciphers instead.
|
|
|
- *
|
|
|
- */
|
|
|
-// #define MBEDTLS_AES_ALT
|
|
|
-// #define MBEDTLS_ARC4_ALT
|
|
|
-// #define MBEDTLS_DES_ALT
|
|
|
-// #define MBEDTLS_MD5_ALT
|
|
|
-// #define MBEDTLS_SHA1_ALT
|
|
|
-
|
|
|
-/*
|
|
|
- * When replacing the elliptic curve module, pleace consider, that it is
|
|
|
- * implemented with two .c files:
|
|
|
- * - ecp.c
|
|
|
- * - ecp_curves.c
|
|
|
- * You can replace them very much like all the other MBEDTLS__MODULE_NAME__ALT
|
|
|
- * macros as described above. The only difference is that you have to make sure
|
|
|
- * that you provide functionality for both .c files.
|
|
|
- */
|
|
|
-//#define MBEDTLS_ECP_ALT
|
|
|
-
|
|
|
-/**
|
|
|
- * \def MBEDTLS_MD2_PROCESS_ALT
|
|
|
- *
|
|
|
- * MBEDTLS__FUNCTION_NAME__ALT: Uncomment a macro to let mbed TLS use you
|
|
|
- * alternate core implementation of symmetric crypto or hash function. Keep in
|
|
|
- * mind that function prototypes should remain the same.
|
|
|
- *
|
|
|
- * This replaces only one function. The header file from mbed TLS is still
|
|
|
- * used, in contrast to the MBEDTLS__MODULE_NAME__ALT flags.
|
|
|
- *
|
|
|
- * Example: In case you uncomment MBEDTLS_SHA256_PROCESS_ALT, mbed TLS will
|
|
|
- * no longer provide the mbedtls_sha1_process() function, but it will still provide
|
|
|
- * the other function (using your mbedtls_sha1_process() function) and the definition
|
|
|
- * of mbedtls_sha1_context, so your implementation of mbedtls_sha1_process must be compatible
|
|
|
- * with this definition.
|
|
|
- *
|
|
|
- * \note Because of a signature change, the core AES encryption and decryption routines are
|
|
|
- * currently named mbedtls_aes_internal_encrypt and mbedtls_aes_internal_decrypt,
|
|
|
- * respectively. When setting up alternative implementations, these functions should
|
|
|
- * be overriden, but the wrapper functions mbedtls_aes_decrypt and mbedtls_aes_encrypt
|
|
|
- * must stay untouched.
|
|
|
- *
|
|
|
- * \note If you use the AES_xxx_ALT macros, then is is recommended to also set
|
|
|
- * MBEDTLS_AES_ROM_TABLES in order to help the linker garbage-collect the AES
|
|
|
- * tables.
|
|
|
- *
|
|
|
- * Uncomment a macro to enable alternate implementation of the corresponding
|
|
|
- * function.
|
|
|
- *
|
|
|
- * \warning MD2, MD4, MD5, DES and SHA-1 are considered weak and their use
|
|
|
- * constitutes a security risk. If possible, we recommend avoiding
|
|
|
- * dependencies on them, and considering stronger message digests
|
|
|
- * and ciphers instead.
|
|
|
- *
|
|
|
- */
|
|
|
-//#define MBEDTLS_MD2_PROCESS_ALT
|
|
|
-//#define MBEDTLS_MD4_PROCESS_ALT
|
|
|
-//#define MBEDTLS_MD5_PROCESS_ALT
|
|
|
-//#define MBEDTLS_RIPEMD160_PROCESS_ALT
|
|
|
-//#define MBEDTLS_SHA1_PROCESS_ALT
|
|
|
-//#define MBEDTLS_SHA256_PROCESS_ALT
|
|
|
-//#define MBEDTLS_SHA512_PROCESS_ALT
|
|
|
-//#define MBEDTLS_DES_SETKEY_ALT
|
|
|
-//#define MBEDTLS_DES_CRYPT_ECB_ALT
|
|
|
-//#define MBEDTLS_DES3_CRYPT_ECB_ALT
|
|
|
-//#define MBEDTLS_AES_SETKEY_ENC_ALT
|
|
|
-//#define MBEDTLS_AES_SETKEY_DEC_ALT
|
|
|
-//#define MBEDTLS_AES_ENCRYPT_ALT
|
|
|
-//#define MBEDTLS_AES_DECRYPT_ALT
|
|
|
-//#define MBEDTLS_ECDH_GEN_PUBLIC_ALT
|
|
|
-//#define MBEDTLS_ECDH_COMPUTE_SHARED_ALT
|
|
|
-//#define MBEDTLS_ECDSA_VERIFY_ALT
|
|
|
-//#define MBEDTLS_ECDSA_SIGN_ALT
|
|
|
-//#define MBEDTLS_ECDSA_GENKEY_ALT
|
|
|
-
|
|
|
-/**
|
|
|
- * \def MBEDTLS_ECP_INTERNAL_ALT
|
|
|
- *
|
|
|
- * Expose a part of the internal interface of the Elliptic Curve Point module.
|
|
|
- *
|
|
|
- * MBEDTLS_ECP__FUNCTION_NAME__ALT: Uncomment a macro to let mbed TLS use your
|
|
|
- * alternative core implementation of elliptic curve arithmetic. Keep in mind
|
|
|
- * that function prototypes should remain the same.
|
|
|
- *
|
|
|
- * This partially replaces one function. The header file from mbed TLS is still
|
|
|
- * used, in contrast to the MBEDTLS_ECP_ALT flag. The original implementation
|
|
|
- * is still present and it is used for group structures not supported by the
|
|
|
- * alternative.
|
|
|
- *
|
|
|
- * Any of these options become available by defining MBEDTLS_ECP_INTERNAL_ALT
|
|
|
- * and implementing the following functions:
|
|
|
- * unsigned char mbedtls_internal_ecp_grp_capable(
|
|
|
- * const mbedtls_ecp_group *grp )
|
|
|
- * int mbedtls_internal_ecp_init( const mbedtls_ecp_group *grp )
|
|
|
- * void mbedtls_internal_ecp_deinit( const mbedtls_ecp_group *grp )
|
|
|
- * The mbedtls_internal_ecp_grp_capable function should return 1 if the
|
|
|
- * replacement functions implement arithmetic for the given group and 0
|
|
|
- * otherwise.
|
|
|
- * The functions mbedtls_internal_ecp_init and mbedtls_internal_ecp_deinit are
|
|
|
- * called before and after each point operation and provide an opportunity to
|
|
|
- * implement optimized set up and tear down instructions.
|
|
|
- *
|
|
|
- * Example: In case you uncomment MBEDTLS_ECP_INTERNAL_ALT and
|
|
|
- * MBEDTLS_ECP_DOUBLE_JAC_ALT, mbed TLS will still provide the ecp_double_jac
|
|
|
- * function, but will use your mbedtls_internal_ecp_double_jac if the group is
|
|
|
- * supported (your mbedtls_internal_ecp_grp_capable function returns 1 when
|
|
|
- * receives it as an argument). If the group is not supported then the original
|
|
|
- * implementation is used. The other functions and the definition of
|
|
|
- * mbedtls_ecp_group and mbedtls_ecp_point will not change, so your
|
|
|
- * implementation of mbedtls_internal_ecp_double_jac and
|
|
|
- * mbedtls_internal_ecp_grp_capable must be compatible with this definition.
|
|
|
- *
|
|
|
- * Uncomment a macro to enable alternate implementation of the corresponding
|
|
|
- * function.
|
|
|
- */
|
|
|
-/* Required for all the functions in this section */
|
|
|
-//#define MBEDTLS_ECP_INTERNAL_ALT
|
|
|
-/* Support for Weierstrass curves with Jacobi representation */
|
|
|
-//#define MBEDTLS_ECP_RANDOMIZE_JAC_ALT
|
|
|
-//#define MBEDTLS_ECP_ADD_MIXED_ALT
|
|
|
-//#define MBEDTLS_ECP_DOUBLE_JAC_ALT
|
|
|
-//#define MBEDTLS_ECP_NORMALIZE_JAC_MANY_ALT
|
|
|
-//#define MBEDTLS_ECP_NORMALIZE_JAC_ALT
|
|
|
-/* Support for curves with Montgomery arithmetic */
|
|
|
-//#define MBEDTLS_ECP_DOUBLE_ADD_MXZ_ALT
|
|
|
-//#define MBEDTLS_ECP_RANDOMIZE_MXZ_ALT
|
|
|
-//#define MBEDTLS_ECP_NORMALIZE_MXZ_ALT
|
|
|
-
|
|
|
-/**
|
|
|
- * \def MBEDTLS_TEST_NULL_ENTROPY
|
|
|
- *
|
|
|
- * Enables testing and use of mbed TLS without any configured entropy sources.
|
|
|
- * This permits use of the library on platforms before an entropy source has
|
|
|
- * been integrated (see for example the MBEDTLS_ENTROPY_HARDWARE_ALT or the
|
|
|
- * MBEDTLS_ENTROPY_NV_SEED switches).
|
|
|
- *
|
|
|
- * WARNING! This switch MUST be disabled in production builds, and is suitable
|
|
|
- * only for development.
|
|
|
- * Enabling the switch negates any security provided by the library.
|
|
|
- *
|
|
|
- * Requires MBEDTLS_ENTROPY_C, MBEDTLS_NO_DEFAULT_ENTROPY_SOURCES
|
|
|
- *
|
|
|
- */
|
|
|
-//#define MBEDTLS_TEST_NULL_ENTROPY
|
|
|
-
|
|
|
-/**
|
|
|
- * \def MBEDTLS_ENTROPY_HARDWARE_ALT
|
|
|
- *
|
|
|
- * Uncomment this macro to let mbed TLS use your own implementation of a
|
|
|
- * hardware entropy collector.
|
|
|
- *
|
|
|
- * Your function must be called \c mbedtls_hardware_poll(), have the same
|
|
|
- * prototype as declared in entropy_poll.h, and accept NULL as first argument.
|
|
|
- *
|
|
|
- * Uncomment to use your own hardware entropy collector.
|
|
|
- */
|
|
|
-#define MBEDTLS_ENTROPY_HARDWARE_ALT
|
|
|
-
|
|
|
-/**
|
|
|
- * \def MBEDTLS_AES_ROM_TABLES
|
|
|
- *
|
|
|
- * Store the AES tables in ROM.
|
|
|
- *
|
|
|
- * Uncomment this macro to store the AES tables in ROM.
|
|
|
- */
|
|
|
-#define MBEDTLS_AES_ROM_TABLES
|
|
|
-
|
|
|
-/**
|
|
|
- * \def MBEDTLS_CAMELLIA_SMALL_MEMORY
|
|
|
- *
|
|
|
- * Use less ROM for the Camellia implementation (saves about 768 bytes).
|
|
|
- *
|
|
|
- * Uncomment this macro to use less memory for Camellia.
|
|
|
- */
|
|
|
-//#define MBEDTLS_CAMELLIA_SMALL_MEMORY
|
|
|
-
|
|
|
-/**
|
|
|
- * \def MBEDTLS_CIPHER_MODE_CBC
|
|
|
- *
|
|
|
- * Enable Cipher Block Chaining mode (CBC) for symmetric ciphers.
|
|
|
- */
|
|
|
-#define MBEDTLS_CIPHER_MODE_CBC
|
|
|
-
|
|
|
-/**
|
|
|
- * \def MBEDTLS_CIPHER_MODE_CFB
|
|
|
- *
|
|
|
- * Enable Cipher Feedback mode (CFB) for symmetric ciphers.
|
|
|
- */
|
|
|
-//#define MBEDTLS_CIPHER_MODE_CFB
|
|
|
-
|
|
|
-/**
|
|
|
- * \def MBEDTLS_CIPHER_MODE_CTR
|
|
|
- *
|
|
|
- * Enable Counter Block Cipher mode (CTR) for symmetric ciphers.
|
|
|
- */
|
|
|
-#define MBEDTLS_CIPHER_MODE_CTR
|
|
|
-
|
|
|
-/**
|
|
|
- * \def MBEDTLS_CIPHER_NULL_CIPHER
|
|
|
- *
|
|
|
- * Enable NULL cipher.
|
|
|
- * Warning: Only do so when you know what you are doing. This allows for
|
|
|
- * encryption or channels without any security!
|
|
|
- *
|
|
|
- * Requires MBEDTLS_ENABLE_WEAK_CIPHERSUITES as well to enable
|
|
|
- * the following ciphersuites:
|
|
|
- * MBEDTLS_TLS_ECDH_ECDSA_WITH_NULL_SHA
|
|
|
- * MBEDTLS_TLS_ECDH_RSA_WITH_NULL_SHA
|
|
|
- * MBEDTLS_TLS_ECDHE_ECDSA_WITH_NULL_SHA
|
|
|
- * MBEDTLS_TLS_ECDHE_RSA_WITH_NULL_SHA
|
|
|
- * MBEDTLS_TLS_ECDHE_PSK_WITH_NULL_SHA384
|
|
|
- * MBEDTLS_TLS_ECDHE_PSK_WITH_NULL_SHA256
|
|
|
- * MBEDTLS_TLS_ECDHE_PSK_WITH_NULL_SHA
|
|
|
- * MBEDTLS_TLS_DHE_PSK_WITH_NULL_SHA384
|
|
|
- * MBEDTLS_TLS_DHE_PSK_WITH_NULL_SHA256
|
|
|
- * MBEDTLS_TLS_DHE_PSK_WITH_NULL_SHA
|
|
|
- * MBEDTLS_TLS_RSA_WITH_NULL_SHA256
|
|
|
- * MBEDTLS_TLS_RSA_WITH_NULL_SHA
|
|
|
- * MBEDTLS_TLS_RSA_WITH_NULL_MD5
|
|
|
- * MBEDTLS_TLS_RSA_PSK_WITH_NULL_SHA384
|
|
|
- * MBEDTLS_TLS_RSA_PSK_WITH_NULL_SHA256
|
|
|
- * MBEDTLS_TLS_RSA_PSK_WITH_NULL_SHA
|
|
|
- * MBEDTLS_TLS_PSK_WITH_NULL_SHA384
|
|
|
- * MBEDTLS_TLS_PSK_WITH_NULL_SHA256
|
|
|
- * MBEDTLS_TLS_PSK_WITH_NULL_SHA
|
|
|
- *
|
|
|
- * Uncomment this macro to enable the NULL cipher and ciphersuites
|
|
|
- */
|
|
|
-//#define MBEDTLS_CIPHER_NULL_CIPHER
|
|
|
-
|
|
|
-/**
|
|
|
- * \def MBEDTLS_CIPHER_PADDING_PKCS7
|
|
|
- *
|
|
|
- * MBEDTLS_CIPHER_PADDING_XXX: Uncomment or comment macros to add support for
|
|
|
- * specific padding modes in the cipher layer with cipher modes that support
|
|
|
- * padding (e.g. CBC)
|
|
|
- *
|
|
|
- * If you disable all padding modes, only full blocks can be used with CBC.
|
|
|
- *
|
|
|
- * Enable padding modes in the cipher layer.
|
|
|
- */
|
|
|
-#define MBEDTLS_CIPHER_PADDING_PKCS7
|
|
|
-#define MBEDTLS_CIPHER_PADDING_ONE_AND_ZEROS
|
|
|
-#define MBEDTLS_CIPHER_PADDING_ZEROS_AND_LEN
|
|
|
-#define MBEDTLS_CIPHER_PADDING_ZEROS
|
|
|
-
|
|
|
-/**
|
|
|
- * \def MBEDTLS_ENABLE_WEAK_CIPHERSUITES
|
|
|
- *
|
|
|
- * Enable weak ciphersuites in SSL / TLS.
|
|
|
- * Warning: Only do so when you know what you are doing. This allows for
|
|
|
- * channels with virtually no security at all!
|
|
|
- *
|
|
|
- * This enables the following ciphersuites:
|
|
|
- * MBEDTLS_TLS_RSA_WITH_DES_CBC_SHA
|
|
|
- * MBEDTLS_TLS_DHE_RSA_WITH_DES_CBC_SHA
|
|
|
- *
|
|
|
- * Uncomment this macro to enable weak ciphersuites
|
|
|
- *
|
|
|
- * \warning DES is considered a weak cipher and its use constitutes a
|
|
|
- * security risk. We recommend considering stronger ciphers instead.
|
|
|
- */
|
|
|
-//#define MBEDTLS_ENABLE_WEAK_CIPHERSUITES
|
|
|
-
|
|
|
-/**
|
|
|
- * \def MBEDTLS_REMOVE_ARC4_CIPHERSUITES
|
|
|
- *
|
|
|
- * Remove RC4 ciphersuites by default in SSL / TLS.
|
|
|
- * This flag removes the ciphersuites based on RC4 from the default list as
|
|
|
- * returned by mbedtls_ssl_list_ciphersuites(). However, it is still possible to
|
|
|
- * enable (some of) them with mbedtls_ssl_conf_ciphersuites() by including them
|
|
|
- * explicitly.
|
|
|
- *
|
|
|
- * Uncomment this macro to remove RC4 ciphersuites by default.
|
|
|
- */
|
|
|
-//#define MBEDTLS_REMOVE_ARC4_CIPHERSUITES
|
|
|
-
|
|
|
-/**
|
|
|
- * \def MBEDTLS_REMOVE_3DES_CIPHERSUITES
|
|
|
- *
|
|
|
- * Remove 3DES ciphersuites by default in SSL / TLS.
|
|
|
- * This flag removes the ciphersuites based on 3DES from the default list as
|
|
|
- * returned by mbedtls_ssl_list_ciphersuites(). However, it is still possible
|
|
|
- * to enable (some of) them with mbedtls_ssl_conf_ciphersuites() by including
|
|
|
- * them explicitly.
|
|
|
- *
|
|
|
- * A man-in-the-browser attacker can recover authentication tokens sent through
|
|
|
- * a TLS connection using a 3DES based cipher suite (see "On the Practical
|
|
|
- * (In-)Security of 64-bit Block Ciphers" by Karthikeyan Bhargavan and Gaëtan
|
|
|
- * Leurent, see https://sweet32.info/SWEET32_CCS16.pdf). If this attack falls
|
|
|
- * in your threat model or you are unsure, then you should keep this option
|
|
|
- * enabled to remove 3DES based cipher suites.
|
|
|
- *
|
|
|
- * Comment this macro to keep 3DES in the default ciphersuite list.
|
|
|
- */
|
|
|
-#define MBEDTLS_REMOVE_3DES_CIPHERSUITES
|
|
|
-
|
|
|
-/**
|
|
|
- * \def MBEDTLS_ECP_DP_SECP192R1_ENABLED
|
|
|
- *
|
|
|
- * MBEDTLS_ECP_XXXX_ENABLED: Enables specific curves within the Elliptic Curve
|
|
|
- * module. By default all supported curves are enabled.
|
|
|
- *
|
|
|
- * Comment macros to disable the curve and functions for it
|
|
|
- */
|
|
|
-//#define MBEDTLS_ECP_DP_SECP192R1_ENABLED
|
|
|
-//#define MBEDTLS_ECP_DP_SECP224R1_ENABLED
|
|
|
-#define MBEDTLS_ECP_DP_SECP256R1_ENABLED
|
|
|
-//#define MBEDTLS_ECP_DP_SECP384R1_ENABLED
|
|
|
-//#define MBEDTLS_ECP_DP_SECP521R1_ENABLED
|
|
|
-//#define MBEDTLS_ECP_DP_SECP192K1_ENABLED
|
|
|
-//#define MBEDTLS_ECP_DP_SECP224K1_ENABLED
|
|
|
-//#define MBEDTLS_ECP_DP_SECP256K1_ENABLED
|
|
|
-//#define MBEDTLS_ECP_DP_BP256R1_ENABLED
|
|
|
-//#define MBEDTLS_ECP_DP_BP384R1_ENABLED
|
|
|
-//#define MBEDTLS_ECP_DP_BP512R1_ENABLED
|
|
|
-//#define MBEDTLS_ECP_DP_CURVE25519_ENABLED
|
|
|
-
|
|
|
-/**
|
|
|
- * \def MBEDTLS_ECP_NIST_OPTIM
|
|
|
- *
|
|
|
- * Enable specific 'modulo p' routines for each NIST prime.
|
|
|
- * Depending on the prime and architecture, makes operations 4 to 8 times
|
|
|
- * faster on the corresponding curve.
|
|
|
- *
|
|
|
- * Comment this macro to disable NIST curves optimisation.
|
|
|
- */
|
|
|
-//#define MBEDTLS_ECP_NIST_OPTIM
|
|
|
-
|
|
|
-/**
|
|
|
- * \def MBEDTLS_ECDSA_DETERMINISTIC
|
|
|
- *
|
|
|
- * Enable deterministic ECDSA (RFC 6979).
|
|
|
- * Standard ECDSA is "fragile" in the sense that lack of entropy when signing
|
|
|
- * may result in a compromise of the long-term signing key. This is avoided by
|
|
|
- * the deterministic variant.
|
|
|
- *
|
|
|
- * Requires: MBEDTLS_HMAC_DRBG_C
|
|
|
- *
|
|
|
- * Comment this macro to disable deterministic ECDSA.
|
|
|
- */
|
|
|
-//#define MBEDTLS_ECDSA_DETERMINISTIC
|
|
|
-
|
|
|
-/**
|
|
|
- * \def MBEDTLS_KEY_EXCHANGE_PSK_ENABLED
|
|
|
- *
|
|
|
- * Enable the PSK based ciphersuite modes in SSL / TLS.
|
|
|
- *
|
|
|
- * This enables the following ciphersuites (if other requisites are
|
|
|
- * enabled as well):
|
|
|
- * MBEDTLS_TLS_PSK_WITH_AES_256_GCM_SHA384
|
|
|
- * MBEDTLS_TLS_PSK_WITH_AES_256_CBC_SHA384
|
|
|
- * MBEDTLS_TLS_PSK_WITH_AES_256_CBC_SHA
|
|
|
- * MBEDTLS_TLS_PSK_WITH_CAMELLIA_256_GCM_SHA384
|
|
|
- * MBEDTLS_TLS_PSK_WITH_CAMELLIA_256_CBC_SHA384
|
|
|
- * MBEDTLS_TLS_PSK_WITH_AES_128_GCM_SHA256
|
|
|
- * MBEDTLS_TLS_PSK_WITH_AES_128_CBC_SHA256
|
|
|
- * MBEDTLS_TLS_PSK_WITH_AES_128_CBC_SHA
|
|
|
- * MBEDTLS_TLS_PSK_WITH_CAMELLIA_128_GCM_SHA256
|
|
|
- * MBEDTLS_TLS_PSK_WITH_CAMELLIA_128_CBC_SHA256
|
|
|
- * MBEDTLS_TLS_PSK_WITH_3DES_EDE_CBC_SHA
|
|
|
- * MBEDTLS_TLS_PSK_WITH_RC4_128_SHA
|
|
|
- */
|
|
|
-//#define MBEDTLS_KEY_EXCHANGE_PSK_ENABLED
|
|
|
-
|
|
|
-/**
|
|
|
- * \def MBEDTLS_KEY_EXCHANGE_DHE_PSK_ENABLED
|
|
|
- *
|
|
|
- * Enable the DHE-PSK based ciphersuite modes in SSL / TLS.
|
|
|
- *
|
|
|
- * Requires: MBEDTLS_DHM_C
|
|
|
- *
|
|
|
- * This enables the following ciphersuites (if other requisites are
|
|
|
- * enabled as well):
|
|
|
- * MBEDTLS_TLS_DHE_PSK_WITH_AES_256_GCM_SHA384
|
|
|
- * MBEDTLS_TLS_DHE_PSK_WITH_AES_256_CBC_SHA384
|
|
|
- * MBEDTLS_TLS_DHE_PSK_WITH_AES_256_CBC_SHA
|
|
|
- * MBEDTLS_TLS_DHE_PSK_WITH_CAMELLIA_256_GCM_SHA384
|
|
|
- * MBEDTLS_TLS_DHE_PSK_WITH_CAMELLIA_256_CBC_SHA384
|
|
|
- * MBEDTLS_TLS_DHE_PSK_WITH_AES_128_GCM_SHA256
|
|
|
- * MBEDTLS_TLS_DHE_PSK_WITH_AES_128_CBC_SHA256
|
|
|
- * MBEDTLS_TLS_DHE_PSK_WITH_AES_128_CBC_SHA
|
|
|
- * MBEDTLS_TLS_DHE_PSK_WITH_CAMELLIA_128_GCM_SHA256
|
|
|
- * MBEDTLS_TLS_DHE_PSK_WITH_CAMELLIA_128_CBC_SHA256
|
|
|
- * MBEDTLS_TLS_DHE_PSK_WITH_3DES_EDE_CBC_SHA
|
|
|
- * MBEDTLS_TLS_DHE_PSK_WITH_RC4_128_SHA
|
|
|
- *
|
|
|
- * \warning Using DHE constitutes a security risk as it
|
|
|
- * is not possible to validate custom DH parameters.
|
|
|
- * If possible, it is recommended users should consider
|
|
|
- * preferring other methods of key exchange.
|
|
|
- * See dhm.h for more details.
|
|
|
- *
|
|
|
- */
|
|
|
-//#define MBEDTLS_KEY_EXCHANGE_DHE_PSK_ENABLED
|
|
|
-
|
|
|
-/**
|
|
|
- * \def MBEDTLS_KEY_EXCHANGE_ECDHE_PSK_ENABLED
|
|
|
- *
|
|
|
- * Enable the ECDHE-PSK based ciphersuite modes in SSL / TLS.
|
|
|
- *
|
|
|
- * Requires: MBEDTLS_ECDH_C
|
|
|
- *
|
|
|
- * This enables the following ciphersuites (if other requisites are
|
|
|
- * enabled as well):
|
|
|
- * MBEDTLS_TLS_ECDHE_PSK_WITH_AES_256_CBC_SHA384
|
|
|
- * MBEDTLS_TLS_ECDHE_PSK_WITH_AES_256_CBC_SHA
|
|
|
- * MBEDTLS_TLS_ECDHE_PSK_WITH_CAMELLIA_256_CBC_SHA384
|
|
|
- * MBEDTLS_TLS_ECDHE_PSK_WITH_AES_128_CBC_SHA256
|
|
|
- * MBEDTLS_TLS_ECDHE_PSK_WITH_AES_128_CBC_SHA
|
|
|
- * MBEDTLS_TLS_ECDHE_PSK_WITH_CAMELLIA_128_CBC_SHA256
|
|
|
- * MBEDTLS_TLS_ECDHE_PSK_WITH_3DES_EDE_CBC_SHA
|
|
|
- * MBEDTLS_TLS_ECDHE_PSK_WITH_RC4_128_SHA
|
|
|
- */
|
|
|
-//#define MBEDTLS_KEY_EXCHANGE_ECDHE_PSK_ENABLED
|
|
|
-
|
|
|
-/**
|
|
|
- * \def MBEDTLS_KEY_EXCHANGE_RSA_PSK_ENABLED
|
|
|
- *
|
|
|
- * Enable the RSA-PSK based ciphersuite modes in SSL / TLS.
|
|
|
- *
|
|
|
- * Requires: MBEDTLS_RSA_C, MBEDTLS_PKCS1_V15,
|
|
|
- * MBEDTLS_X509_CRT_PARSE_C
|
|
|
- *
|
|
|
- * This enables the following ciphersuites (if other requisites are
|
|
|
- * enabled as well):
|
|
|
- * MBEDTLS_TLS_RSA_PSK_WITH_AES_256_GCM_SHA384
|
|
|
- * MBEDTLS_TLS_RSA_PSK_WITH_AES_256_CBC_SHA384
|
|
|
- * MBEDTLS_TLS_RSA_PSK_WITH_AES_256_CBC_SHA
|
|
|
- * MBEDTLS_TLS_RSA_PSK_WITH_CAMELLIA_256_GCM_SHA384
|
|
|
- * MBEDTLS_TLS_RSA_PSK_WITH_CAMELLIA_256_CBC_SHA384
|
|
|
- * MBEDTLS_TLS_RSA_PSK_WITH_AES_128_GCM_SHA256
|
|
|
- * MBEDTLS_TLS_RSA_PSK_WITH_AES_128_CBC_SHA256
|
|
|
- * MBEDTLS_TLS_RSA_PSK_WITH_AES_128_CBC_SHA
|
|
|
- * MBEDTLS_TLS_RSA_PSK_WITH_CAMELLIA_128_GCM_SHA256
|
|
|
- * MBEDTLS_TLS_RSA_PSK_WITH_CAMELLIA_128_CBC_SHA256
|
|
|
- * MBEDTLS_TLS_RSA_PSK_WITH_3DES_EDE_CBC_SHA
|
|
|
- * MBEDTLS_TLS_RSA_PSK_WITH_RC4_128_SHA
|
|
|
- */
|
|
|
-#define MBEDTLS_KEY_EXCHANGE_RSA_PSK_ENABLED
|
|
|
-
|
|
|
-/**
|
|
|
- * \def MBEDTLS_KEY_EXCHANGE_RSA_ENABLED
|
|
|
- *
|
|
|
- * Enable the RSA-only based ciphersuite modes in SSL / TLS.
|
|
|
- *
|
|
|
- * Requires: MBEDTLS_RSA_C, MBEDTLS_PKCS1_V15,
|
|
|
- * MBEDTLS_X509_CRT_PARSE_C
|
|
|
- *
|
|
|
- * This enables the following ciphersuites (if other requisites are
|
|
|
- * enabled as well):
|
|
|
- * MBEDTLS_TLS_RSA_WITH_AES_256_GCM_SHA384
|
|
|
- * MBEDTLS_TLS_RSA_WITH_AES_256_CBC_SHA256
|
|
|
- * MBEDTLS_TLS_RSA_WITH_AES_256_CBC_SHA
|
|
|
- * MBEDTLS_TLS_RSA_WITH_CAMELLIA_256_GCM_SHA384
|
|
|
- * MBEDTLS_TLS_RSA_WITH_CAMELLIA_256_CBC_SHA256
|
|
|
- * MBEDTLS_TLS_RSA_WITH_CAMELLIA_256_CBC_SHA
|
|
|
- * MBEDTLS_TLS_RSA_WITH_AES_128_GCM_SHA256
|
|
|
- * MBEDTLS_TLS_RSA_WITH_AES_128_CBC_SHA256
|
|
|
- * MBEDTLS_TLS_RSA_WITH_AES_128_CBC_SHA
|
|
|
- * MBEDTLS_TLS_RSA_WITH_CAMELLIA_128_GCM_SHA256
|
|
|
- * MBEDTLS_TLS_RSA_WITH_CAMELLIA_128_CBC_SHA256
|
|
|
- * MBEDTLS_TLS_RSA_WITH_CAMELLIA_128_CBC_SHA
|
|
|
- * MBEDTLS_TLS_RSA_WITH_3DES_EDE_CBC_SHA
|
|
|
- * MBEDTLS_TLS_RSA_WITH_RC4_128_SHA
|
|
|
- * MBEDTLS_TLS_RSA_WITH_RC4_128_MD5
|
|
|
- */
|
|
|
-#define MBEDTLS_KEY_EXCHANGE_RSA_ENABLED
|
|
|
-
|
|
|
-/**
|
|
|
- * \def MBEDTLS_KEY_EXCHANGE_DHE_RSA_ENABLED
|
|
|
- *
|
|
|
- * Enable the DHE-RSA based ciphersuite modes in SSL / TLS.
|
|
|
- *
|
|
|
- * Requires: MBEDTLS_DHM_C, MBEDTLS_RSA_C, MBEDTLS_PKCS1_V15,
|
|
|
- * MBEDTLS_X509_CRT_PARSE_C
|
|
|
- *
|
|
|
- * This enables the following ciphersuites (if other requisites are
|
|
|
- * enabled as well):
|
|
|
- * MBEDTLS_TLS_DHE_RSA_WITH_AES_256_GCM_SHA384
|
|
|
- * MBEDTLS_TLS_DHE_RSA_WITH_AES_256_CBC_SHA256
|
|
|
- * MBEDTLS_TLS_DHE_RSA_WITH_AES_256_CBC_SHA
|
|
|
- * MBEDTLS_TLS_DHE_RSA_WITH_CAMELLIA_256_GCM_SHA384
|
|
|
- * MBEDTLS_TLS_DHE_RSA_WITH_CAMELLIA_256_CBC_SHA256
|
|
|
- * MBEDTLS_TLS_DHE_RSA_WITH_CAMELLIA_256_CBC_SHA
|
|
|
- * MBEDTLS_TLS_DHE_RSA_WITH_AES_128_GCM_SHA256
|
|
|
- * MBEDTLS_TLS_DHE_RSA_WITH_AES_128_CBC_SHA256
|
|
|
- * MBEDTLS_TLS_DHE_RSA_WITH_AES_128_CBC_SHA
|
|
|
- * MBEDTLS_TLS_DHE_RSA_WITH_CAMELLIA_128_GCM_SHA256
|
|
|
- * MBEDTLS_TLS_DHE_RSA_WITH_CAMELLIA_128_CBC_SHA256
|
|
|
- * MBEDTLS_TLS_DHE_RSA_WITH_CAMELLIA_128_CBC_SHA
|
|
|
- * MBEDTLS_TLS_DHE_RSA_WITH_3DES_EDE_CBC_SHA
|
|
|
- *
|
|
|
- * \warning Using DHE constitutes a security risk as it
|
|
|
- * is not possible to validate custom DH parameters.
|
|
|
- * If possible, it is recommended users should consider
|
|
|
- * preferring other methods of key exchange.
|
|
|
- * See dhm.h for more details.
|
|
|
- *
|
|
|
- */
|
|
|
-//#define MBEDTLS_KEY_EXCHANGE_DHE_RSA_ENABLED
|
|
|
-
|
|
|
-/**
|
|
|
- * \def MBEDTLS_KEY_EXCHANGE_ECDHE_RSA_ENABLED
|
|
|
- *
|
|
|
- * Enable the ECDHE-RSA based ciphersuite modes in SSL / TLS.
|
|
|
- *
|
|
|
- * Requires: MBEDTLS_ECDH_C, MBEDTLS_RSA_C, MBEDTLS_PKCS1_V15,
|
|
|
- * MBEDTLS_X509_CRT_PARSE_C
|
|
|
- *
|
|
|
- * This enables the following ciphersuites (if other requisites are
|
|
|
- * enabled as well):
|
|
|
- * MBEDTLS_TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384
|
|
|
- * MBEDTLS_TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA384
|
|
|
- * MBEDTLS_TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA
|
|
|
- * MBEDTLS_TLS_ECDHE_RSA_WITH_CAMELLIA_256_GCM_SHA384
|
|
|
- * MBEDTLS_TLS_ECDHE_RSA_WITH_CAMELLIA_256_CBC_SHA384
|
|
|
- * MBEDTLS_TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256
|
|
|
- * MBEDTLS_TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256
|
|
|
- * MBEDTLS_TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA
|
|
|
- * MBEDTLS_TLS_ECDHE_RSA_WITH_CAMELLIA_128_GCM_SHA256
|
|
|
- * MBEDTLS_TLS_ECDHE_RSA_WITH_CAMELLIA_128_CBC_SHA256
|
|
|
- * MBEDTLS_TLS_ECDHE_RSA_WITH_3DES_EDE_CBC_SHA
|
|
|
- * MBEDTLS_TLS_ECDHE_RSA_WITH_RC4_128_SHA
|
|
|
- */
|
|
|
-// #define MBEDTLS_KEY_EXCHANGE_ECDHE_RSA_ENABLED
|
|
|
-
|
|
|
-/**
|
|
|
- * \def MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA_ENABLED
|
|
|
- *
|
|
|
- * Enable the ECDHE-ECDSA based ciphersuite modes in SSL / TLS.
|
|
|
- *
|
|
|
- * Requires: MBEDTLS_ECDH_C, MBEDTLS_ECDSA_C, MBEDTLS_X509_CRT_PARSE_C,
|
|
|
- *
|
|
|
- * This enables the following ciphersuites (if other requisites are
|
|
|
- * enabled as well):
|
|
|
- * MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384
|
|
|
- * MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA384
|
|
|
- * MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA
|
|
|
- * MBEDTLS_TLS_ECDHE_ECDSA_WITH_CAMELLIA_256_GCM_SHA384
|
|
|
- * MBEDTLS_TLS_ECDHE_ECDSA_WITH_CAMELLIA_256_CBC_SHA384
|
|
|
- * MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256
|
|
|
- * MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA256
|
|
|
- * MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA
|
|
|
- * MBEDTLS_TLS_ECDHE_ECDSA_WITH_CAMELLIA_128_GCM_SHA256
|
|
|
- * MBEDTLS_TLS_ECDHE_ECDSA_WITH_CAMELLIA_128_CBC_SHA256
|
|
|
- * MBEDTLS_TLS_ECDHE_ECDSA_WITH_3DES_EDE_CBC_SHA
|
|
|
- * MBEDTLS_TLS_ECDHE_ECDSA_WITH_RC4_128_SHA
|
|
|
- */
|
|
|
-//#define MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA_ENABLED
|
|
|
-
|
|
|
-/**
|
|
|
- * \def MBEDTLS_KEY_EXCHANGE_ECDH_ECDSA_ENABLED
|
|
|
- *
|
|
|
- * Enable the ECDH-ECDSA based ciphersuite modes in SSL / TLS.
|
|
|
- *
|
|
|
- * Requires: MBEDTLS_ECDH_C, MBEDTLS_X509_CRT_PARSE_C
|
|
|
- *
|
|
|
- * This enables the following ciphersuites (if other requisites are
|
|
|
- * enabled as well):
|
|
|
- * MBEDTLS_TLS_ECDH_ECDSA_WITH_RC4_128_SHA
|
|
|
- * MBEDTLS_TLS_ECDH_ECDSA_WITH_3DES_EDE_CBC_SHA
|
|
|
- * MBEDTLS_TLS_ECDH_ECDSA_WITH_AES_128_CBC_SHA
|
|
|
- * MBEDTLS_TLS_ECDH_ECDSA_WITH_AES_256_CBC_SHA
|
|
|
- * MBEDTLS_TLS_ECDH_ECDSA_WITH_AES_128_CBC_SHA256
|
|
|
- * MBEDTLS_TLS_ECDH_ECDSA_WITH_AES_256_CBC_SHA384
|
|
|
- * MBEDTLS_TLS_ECDH_ECDSA_WITH_AES_128_GCM_SHA256
|
|
|
- * MBEDTLS_TLS_ECDH_ECDSA_WITH_AES_256_GCM_SHA384
|
|
|
- * MBEDTLS_TLS_ECDH_ECDSA_WITH_CAMELLIA_128_CBC_SHA256
|
|
|
- * MBEDTLS_TLS_ECDH_ECDSA_WITH_CAMELLIA_256_CBC_SHA384
|
|
|
- * MBEDTLS_TLS_ECDH_ECDSA_WITH_CAMELLIA_128_GCM_SHA256
|
|
|
- * MBEDTLS_TLS_ECDH_ECDSA_WITH_CAMELLIA_256_GCM_SHA384
|
|
|
- */
|
|
|
-//#define MBEDTLS_KEY_EXCHANGE_ECDH_ECDSA_ENABLED
|
|
|
-
|
|
|
-/**
|
|
|
- * \def MBEDTLS_KEY_EXCHANGE_ECDH_RSA_ENABLED
|
|
|
- *
|
|
|
- * Enable the ECDH-RSA based ciphersuite modes in SSL / TLS.
|
|
|
- *
|
|
|
- * Requires: MBEDTLS_ECDH_C, MBEDTLS_X509_CRT_PARSE_C
|
|
|
- *
|
|
|
- * This enables the following ciphersuites (if other requisites are
|
|
|
- * enabled as well):
|
|
|
- * MBEDTLS_TLS_ECDH_RSA_WITH_RC4_128_SHA
|
|
|
- * MBEDTLS_TLS_ECDH_RSA_WITH_3DES_EDE_CBC_SHA
|
|
|
- * MBEDTLS_TLS_ECDH_RSA_WITH_AES_128_CBC_SHA
|
|
|
- * MBEDTLS_TLS_ECDH_RSA_WITH_AES_256_CBC_SHA
|
|
|
- * MBEDTLS_TLS_ECDH_RSA_WITH_AES_128_CBC_SHA256
|
|
|
- * MBEDTLS_TLS_ECDH_RSA_WITH_AES_256_CBC_SHA384
|
|
|
- * MBEDTLS_TLS_ECDH_RSA_WITH_AES_128_GCM_SHA256
|
|
|
- * MBEDTLS_TLS_ECDH_RSA_WITH_AES_256_GCM_SHA384
|
|
|
- * MBEDTLS_TLS_ECDH_RSA_WITH_CAMELLIA_128_CBC_SHA256
|
|
|
- * MBEDTLS_TLS_ECDH_RSA_WITH_CAMELLIA_256_CBC_SHA384
|
|
|
- * MBEDTLS_TLS_ECDH_RSA_WITH_CAMELLIA_128_GCM_SHA256
|
|
|
- * MBEDTLS_TLS_ECDH_RSA_WITH_CAMELLIA_256_GCM_SHA384
|
|
|
- */
|
|
|
-//#define MBEDTLS_KEY_EXCHANGE_ECDH_RSA_ENABLED
|
|
|
-
|
|
|
-/**
|
|
|
- * \def MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED
|
|
|
- *
|
|
|
- * Enable the ECJPAKE based ciphersuite modes in SSL / TLS.
|
|
|
- *
|
|
|
- * \warning This is currently experimental. EC J-PAKE support is based on the
|
|
|
- * Thread v1.0.0 specification; incompatible changes to the specification
|
|
|
- * might still happen. For this reason, this is disabled by default.
|
|
|
- *
|
|
|
- * Requires: MBEDTLS_ECJPAKE_C
|
|
|
- * MBEDTLS_SHA256_C
|
|
|
- * MBEDTLS_ECP_DP_SECP256R1_ENABLED
|
|
|
- *
|
|
|
- * This enables the following ciphersuites (if other requisites are
|
|
|
- * enabled as well):
|
|
|
- * MBEDTLS_TLS_ECJPAKE_WITH_AES_128_CCM_8
|
|
|
- */
|
|
|
-//#define MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED
|
|
|
-
|
|
|
-/**
|
|
|
- * \def MBEDTLS_PK_PARSE_EC_EXTENDED
|
|
|
- *
|
|
|
- * Enhance support for reading EC keys using variants of SEC1 not allowed by
|
|
|
- * RFC 5915 and RFC 5480.
|
|
|
- *
|
|
|
- * Currently this means parsing the SpecifiedECDomain choice of EC
|
|
|
- * parameters (only known groups are supported, not arbitrary domains, to
|
|
|
- * avoid validation issues).
|
|
|
- *
|
|
|
- * Disable if you only need to support RFC 5915 + 5480 key formats.
|
|
|
- */
|
|
|
-//#define MBEDTLS_PK_PARSE_EC_EXTENDED
|
|
|
-
|
|
|
-/**
|
|
|
- * \def MBEDTLS_ERROR_STRERROR_DUMMY
|
|
|
- *
|
|
|
- * Enable a dummy error function to make use of mbedtls_strerror() in
|
|
|
- * third party libraries easier when MBEDTLS_ERROR_C is disabled
|
|
|
- * (no effect when MBEDTLS_ERROR_C is enabled).
|
|
|
- *
|
|
|
- * You can safely disable this if MBEDTLS_ERROR_C is enabled, or if you're
|
|
|
- * not using mbedtls_strerror() or error_strerror() in your application.
|
|
|
- *
|
|
|
- * Disable if you run into name conflicts and want to really remove the
|
|
|
- * mbedtls_strerror()
|
|
|
- */
|
|
|
-//#define MBEDTLS_ERROR_STRERROR_DUMMY
|
|
|
-
|
|
|
-/**
|
|
|
- * \def MBEDTLS_GENPRIME
|
|
|
- *
|
|
|
- * Enable the prime-number generation code.
|
|
|
- *
|
|
|
- * Requires: MBEDTLS_BIGNUM_C
|
|
|
- */
|
|
|
-//#define MBEDTLS_GENPRIME
|
|
|
-
|
|
|
-/**
|
|
|
- * \def MBEDTLS_FS_IO
|
|
|
- *
|
|
|
- * Enable functions that use the filesystem.
|
|
|
- */
|
|
|
-//#define MBEDTLS_FS_IO
|
|
|
-
|
|
|
-/**
|
|
|
- * \def MBEDTLS_NO_DEFAULT_ENTROPY_SOURCES
|
|
|
- *
|
|
|
- * Do not add default entropy sources. These are the platform specific,
|
|
|
- * mbedtls_timing_hardclock and HAVEGE based poll functions.
|
|
|
- *
|
|
|
- * This is useful to have more control over the added entropy sources in an
|
|
|
- * application.
|
|
|
- *
|
|
|
- * Uncomment this macro to prevent loading of default entropy functions.
|
|
|
- */
|
|
|
-//#define MBEDTLS_NO_DEFAULT_ENTROPY_SOURCES
|
|
|
-
|
|
|
-/**
|
|
|
- * \def MBEDTLS_NO_PLATFORM_ENTROPY
|
|
|
- *
|
|
|
- * Do not use built-in platform entropy functions.
|
|
|
- * This is useful if your platform does not support
|
|
|
- * standards like the /dev/urandom or Windows CryptoAPI.
|
|
|
- *
|
|
|
- * Uncomment this macro to disable the built-in platform entropy functions.
|
|
|
- */
|
|
|
-#define MBEDTLS_NO_PLATFORM_ENTROPY
|
|
|
-
|
|
|
-/**
|
|
|
- * \def MBEDTLS_ENTROPY_FORCE_SHA256
|
|
|
- *
|
|
|
- * Force the entropy accumulator to use a SHA-256 accumulator instead of the
|
|
|
- * default SHA-512 based one (if both are available).
|
|
|
- *
|
|
|
- * Requires: MBEDTLS_SHA256_C
|
|
|
- *
|
|
|
- * On 32-bit systems SHA-256 can be much faster than SHA-512. Use this option
|
|
|
- * if you have performance concerns.
|
|
|
- *
|
|
|
- * This option is only useful if both MBEDTLS_SHA256_C and
|
|
|
- * MBEDTLS_SHA512_C are defined. Otherwise the available hash module is used.
|
|
|
- */
|
|
|
-// #define MBEDTLS_ENTROPY_FORCE_SHA256
|
|
|
-
|
|
|
-/**
|
|
|
- * \def MBEDTLS_ENTROPY_NV_SEED
|
|
|
- *
|
|
|
- * Enable the non-volatile (NV) seed file-based entropy source.
|
|
|
- * (Also enables the NV seed read/write functions in the platform layer)
|
|
|
- *
|
|
|
- * This is crucial (if not required) on systems that do not have a
|
|
|
- * cryptographic entropy source (in hardware or kernel) available.
|
|
|
- *
|
|
|
- * Requires: MBEDTLS_ENTROPY_C, MBEDTLS_PLATFORM_C
|
|
|
- *
|
|
|
- * \note The read/write functions that are used by the entropy source are
|
|
|
- * determined in the platform layer, and can be modified at runtime and/or
|
|
|
- * compile-time depending on the flags (MBEDTLS_PLATFORM_NV_SEED_*) used.
|
|
|
- *
|
|
|
- * \note If you use the default implementation functions that read a seedfile
|
|
|
- * with regular fopen(), please make sure you make a seedfile with the
|
|
|
- * proper name (defined in MBEDTLS_PLATFORM_STD_NV_SEED_FILE) and at
|
|
|
- * least MBEDTLS_ENTROPY_BLOCK_SIZE bytes in size that can be read from
|
|
|
- * and written to or you will get an entropy source error! The default
|
|
|
- * implementation will only use the first MBEDTLS_ENTROPY_BLOCK_SIZE
|
|
|
- * bytes from the file.
|
|
|
- *
|
|
|
- * \note The entropy collector will write to the seed file before entropy is
|
|
|
- * given to an external source, to update it.
|
|
|
- */
|
|
|
-//#define MBEDTLS_ENTROPY_NV_SEED
|
|
|
-
|
|
|
-/**
|
|
|
- * \def MBEDTLS_MEMORY_DEBUG
|
|
|
- *
|
|
|
- * Enable debugging of buffer allocator memory issues. Automatically prints
|
|
|
- * (to stderr) all (fatal) messages on memory allocation issues. Enables
|
|
|
- * function for 'debug output' of allocated memory.
|
|
|
- *
|
|
|
- * Requires: MBEDTLS_MEMORY_BUFFER_ALLOC_C
|
|
|
- *
|
|
|
- * Uncomment this macro to let the buffer allocator print out error messages.
|
|
|
- */
|
|
|
-//#define MBEDTLS_MEMORY_DEBUG
|
|
|
-
|
|
|
-/**
|
|
|
- * \def MBEDTLS_MEMORY_BACKTRACE
|
|
|
- *
|
|
|
- * Include backtrace information with each allocated block.
|
|
|
- *
|
|
|
- * Requires: MBEDTLS_MEMORY_BUFFER_ALLOC_C
|
|
|
- * GLIBC-compatible backtrace() an backtrace_symbols() support
|
|
|
- *
|
|
|
- * Uncomment this macro to include backtrace information
|
|
|
- */
|
|
|
-//#define MBEDTLS_MEMORY_BACKTRACE
|
|
|
-
|
|
|
-/**
|
|
|
- * \def MBEDTLS_PK_RSA_ALT_SUPPORT
|
|
|
- *
|
|
|
- * Support external private RSA keys (eg from a HSM) in the PK layer.
|
|
|
- *
|
|
|
- * Comment this macro to disable support for external private RSA keys.
|
|
|
- */
|
|
|
-//#define MBEDTLS_PK_RSA_ALT_SUPPORT
|
|
|
-
|
|
|
-/**
|
|
|
- * \def MBEDTLS_PKCS1_V15
|
|
|
- *
|
|
|
- * Enable support for PKCS#1 v1.5 encoding.
|
|
|
- *
|
|
|
- * Requires: MBEDTLS_RSA_C
|
|
|
- *
|
|
|
- * This enables support for PKCS#1 v1.5 operations.
|
|
|
- */
|
|
|
-#define MBEDTLS_PKCS1_V15
|
|
|
-
|
|
|
-/**
|
|
|
- * \def MBEDTLS_PKCS1_V21
|
|
|
- *
|
|
|
- * Enable support for PKCS#1 v2.1 encoding.
|
|
|
- *
|
|
|
- * Requires: MBEDTLS_MD_C, MBEDTLS_RSA_C
|
|
|
- *
|
|
|
- * This enables support for RSAES-OAEP and RSASSA-PSS operations.
|
|
|
- */
|
|
|
-//#define MBEDTLS_PKCS1_V21
|
|
|
-
|
|
|
-/**
|
|
|
- * \def MBEDTLS_RSA_NO_CRT
|
|
|
- *
|
|
|
- * Do not use the Chinese Remainder Theorem
|
|
|
- * for the RSA private operation.
|
|
|
- *
|
|
|
- * Uncomment this macro to disable the use of CRT in RSA.
|
|
|
- *
|
|
|
- */
|
|
|
-//#define MBEDTLS_RSA_NO_CRT
|
|
|
-
|
|
|
-/**
|
|
|
- * \def MBEDTLS_SELF_TEST
|
|
|
- *
|
|
|
- * Enable the checkup functions (*_self_test).
|
|
|
- */
|
|
|
-//#define MBEDTLS_SELF_TEST
|
|
|
-
|
|
|
-/**
|
|
|
- * \def MBEDTLS_SHA256_SMALLER
|
|
|
- *
|
|
|
- * Enable an implementation of SHA-256 that has lower ROM footprint but also
|
|
|
- * lower performance.
|
|
|
- *
|
|
|
- * The default implementation is meant to be a reasonnable compromise between
|
|
|
- * performance and size. This version optimizes more aggressively for size at
|
|
|
- * the expense of performance. Eg on Cortex-M4 it reduces the size of
|
|
|
- * mbedtls_sha256_process() from ~2KB to ~0.5KB for a performance hit of about
|
|
|
- * 30%.
|
|
|
- *
|
|
|
- * Uncomment to enable the smaller implementation of SHA256.
|
|
|
- */
|
|
|
-//#define MBEDTLS_SHA256_SMALLER
|
|
|
-
|
|
|
-/**
|
|
|
- * \def MBEDTLS_SSL_ALL_ALERT_MESSAGES
|
|
|
- *
|
|
|
- * Enable sending of alert messages in case of encountered errors as per RFC.
|
|
|
- * If you choose not to send the alert messages, mbed TLS can still communicate
|
|
|
- * with other servers, only debugging of failures is harder.
|
|
|
- *
|
|
|
- * The advantage of not sending alert messages, is that no information is given
|
|
|
- * about reasons for failures thus preventing adversaries of gaining intel.
|
|
|
- *
|
|
|
- * Enable sending of all alert messages
|
|
|
- */
|
|
|
-//#define MBEDTLS_SSL_ALL_ALERT_MESSAGES
|
|
|
-
|
|
|
-/**
|
|
|
- * \def MBEDTLS_SSL_DEBUG_ALL
|
|
|
- *
|
|
|
- * Enable the debug messages in SSL module for all issues.
|
|
|
- * Debug messages have been disabled in some places to prevent timing
|
|
|
- * attacks due to (unbalanced) debugging function calls.
|
|
|
- *
|
|
|
- * If you need all error reporting you should enable this during debugging,
|
|
|
- * but remove this for production servers that should log as well.
|
|
|
- *
|
|
|
- * Uncomment this macro to report all debug messages on errors introducing
|
|
|
- * a timing side-channel.
|
|
|
- *
|
|
|
- */
|
|
|
-//#define MBEDTLS_SSL_DEBUG_ALL
|
|
|
-
|
|
|
-/** \def MBEDTLS_SSL_ENCRYPT_THEN_MAC
|
|
|
- *
|
|
|
- * Enable support for Encrypt-then-MAC, RFC 7366.
|
|
|
- *
|
|
|
- * This allows peers that both support it to use a more robust protection for
|
|
|
- * ciphersuites using CBC, providing deep resistance against timing attacks
|
|
|
- * on the padding or underlying cipher.
|
|
|
- *
|
|
|
- * This only affects CBC ciphersuites, and is useless if none is defined.
|
|
|
- *
|
|
|
- * Requires: MBEDTLS_SSL_PROTO_TLS1 or
|
|
|
- * MBEDTLS_SSL_PROTO_TLS1_1 or
|
|
|
- * MBEDTLS_SSL_PROTO_TLS1_2
|
|
|
- *
|
|
|
- * Comment this macro to disable support for Encrypt-then-MAC
|
|
|
- */
|
|
|
-//#define MBEDTLS_SSL_ENCRYPT_THEN_MAC
|
|
|
-
|
|
|
-/** \def MBEDTLS_SSL_EXTENDED_MASTER_SECRET
|
|
|
- *
|
|
|
- * Enable support for Extended Master Secret, aka Session Hash
|
|
|
- * (draft-ietf-tls-session-hash-02).
|
|
|
- *
|
|
|
- * This was introduced as "the proper fix" to the Triple Handshake familiy of
|
|
|
- * attacks, but it is recommended to always use it (even if you disable
|
|
|
- * renegotiation), since it actually fixes a more fundamental issue in the
|
|
|
- * original SSL/TLS design, and has implications beyond Triple Handshake.
|
|
|
- *
|
|
|
- * Requires: MBEDTLS_SSL_PROTO_TLS1 or
|
|
|
- * MBEDTLS_SSL_PROTO_TLS1_1 or
|
|
|
- * MBEDTLS_SSL_PROTO_TLS1_2
|
|
|
- *
|
|
|
- * Comment this macro to disable support for Extended Master Secret.
|
|
|
- */
|
|
|
-//#define MBEDTLS_SSL_EXTENDED_MASTER_SECRET
|
|
|
-
|
|
|
-/**
|
|
|
- * \def MBEDTLS_SSL_FALLBACK_SCSV
|
|
|
- *
|
|
|
- * Enable support for FALLBACK_SCSV (draft-ietf-tls-downgrade-scsv-00).
|
|
|
- *
|
|
|
- * For servers, it is recommended to always enable this, unless you support
|
|
|
- * only one version of TLS, or know for sure that none of your clients
|
|
|
- * implements a fallback strategy.
|
|
|
- *
|
|
|
- * For clients, you only need this if you're using a fallback strategy, which
|
|
|
- * is not recommended in the first place, unless you absolutely need it to
|
|
|
- * interoperate with buggy (version-intolerant) servers.
|
|
|
- *
|
|
|
- * Comment this macro to disable support for FALLBACK_SCSV
|
|
|
- */
|
|
|
-//#define MBEDTLS_SSL_FALLBACK_SCSV
|
|
|
-
|
|
|
-/**
|
|
|
- * \def MBEDTLS_SSL_HW_RECORD_ACCEL
|
|
|
- *
|
|
|
- * Enable hooking functions in SSL module for hardware acceleration of
|
|
|
- * individual records.
|
|
|
- *
|
|
|
- * Uncomment this macro to enable hooking functions.
|
|
|
- */
|
|
|
-//#define MBEDTLS_SSL_HW_RECORD_ACCEL
|
|
|
-
|
|
|
-/**
|
|
|
- * \def MBEDTLS_SSL_CBC_RECORD_SPLITTING
|
|
|
- *
|
|
|
- * Enable 1/n-1 record splitting for CBC mode in SSLv3 and TLS 1.0.
|
|
|
- *
|
|
|
- * This is a countermeasure to the BEAST attack, which also minimizes the risk
|
|
|
- * of interoperability issues compared to sending 0-length records.
|
|
|
- *
|
|
|
- * Comment this macro to disable 1/n-1 record splitting.
|
|
|
- */
|
|
|
-// #define MBEDTLS_SSL_CBC_RECORD_SPLITTING
|
|
|
-
|
|
|
-/**
|
|
|
- * \def MBEDTLS_SSL_RENEGOTIATION
|
|
|
- *
|
|
|
- * Enable support for TLS renegotiation.
|
|
|
- *
|
|
|
- * The two main uses of renegotiation are (1) refresh keys on long-lived
|
|
|
- * connections and (2) client authentication after the initial handshake.
|
|
|
- * If you don't need renegotiation, it's probably better to disable it, since
|
|
|
- * it has been associated with security issues in the past and is easy to
|
|
|
- * misuse/misunderstand.
|
|
|
- *
|
|
|
- * Comment this to disable support for renegotiation.
|
|
|
- *
|
|
|
- * \note Even if this option is disabled, both client and server are aware
|
|
|
- * of the Renegotiation Indication Extension (RFC 5746) used to
|
|
|
- * prevent the SSL renegotiation attack (see RFC 5746 Sect. 1).
|
|
|
- * (See \c mbedtls_ssl_conf_legacy_renegotiation for the
|
|
|
- * configuration of this extension).
|
|
|
- *
|
|
|
- */
|
|
|
-//#define MBEDTLS_SSL_RENEGOTIATION
|
|
|
-
|
|
|
-/**
|
|
|
- * \def MBEDTLS_SSL_SRV_SUPPORT_SSLV2_CLIENT_HELLO
|
|
|
- *
|
|
|
- * Enable support for receiving and parsing SSLv2 Client Hello messages for the
|
|
|
- * SSL Server module (MBEDTLS_SSL_SRV_C).
|
|
|
- *
|
|
|
- * Uncomment this macro to enable support for SSLv2 Client Hello messages.
|
|
|
- */
|
|
|
-//#define MBEDTLS_SSL_SRV_SUPPORT_SSLV2_CLIENT_HELLO
|
|
|
-
|
|
|
-/**
|
|
|
- * \def MBEDTLS_SSL_SRV_RESPECT_CLIENT_PREFERENCE
|
|
|
- *
|
|
|
- * Pick the ciphersuite according to the client's preferences rather than ours
|
|
|
- * in the SSL Server module (MBEDTLS_SSL_SRV_C).
|
|
|
- *
|
|
|
- * Uncomment this macro to respect client's ciphersuite order
|
|
|
- */
|
|
|
-//#define MBEDTLS_SSL_SRV_RESPECT_CLIENT_PREFERENCE
|
|
|
-
|
|
|
-/**
|
|
|
- * \def MBEDTLS_SSL_MAX_FRAGMENT_LENGTH
|
|
|
- *
|
|
|
- * Enable support for RFC 6066 max_fragment_length extension in SSL.
|
|
|
- *
|
|
|
- * Comment this macro to disable support for the max_fragment_length extension
|
|
|
- */
|
|
|
-//#define MBEDTLS_SSL_MAX_FRAGMENT_LENGTH
|
|
|
-
|
|
|
-/**
|
|
|
- * \def MBEDTLS_SSL_PROTO_SSL3
|
|
|
- *
|
|
|
- * Enable support for SSL 3.0.
|
|
|
- *
|
|
|
- * Requires: MBEDTLS_MD5_C
|
|
|
- * MBEDTLS_SHA1_C
|
|
|
- *
|
|
|
- * Comment this macro to disable support for SSL 3.0
|
|
|
- */
|
|
|
-//#define MBEDTLS_SSL_PROTO_SSL3
|
|
|
-
|
|
|
-/**
|
|
|
- * \def MBEDTLS_SSL_PROTO_TLS1
|
|
|
- *
|
|
|
- * Enable support for TLS 1.0.
|
|
|
- *
|
|
|
- * Requires: MBEDTLS_MD5_C
|
|
|
- * MBEDTLS_SHA1_C
|
|
|
- *
|
|
|
- * Comment this macro to disable support for TLS 1.0
|
|
|
- */
|
|
|
-#define MBEDTLS_SSL_PROTO_TLS1
|
|
|
-
|
|
|
-/**
|
|
|
- * \def MBEDTLS_SSL_PROTO_TLS1_1
|
|
|
- *
|
|
|
- * Enable support for TLS 1.1 (and DTLS 1.0 if DTLS is enabled).
|
|
|
- *
|
|
|
- * Requires: MBEDTLS_MD5_C
|
|
|
- * MBEDTLS_SHA1_C
|
|
|
- *
|
|
|
- * Comment this macro to disable support for TLS 1.1 / DTLS 1.0
|
|
|
- */
|
|
|
-#define MBEDTLS_SSL_PROTO_TLS1_1
|
|
|
-
|
|
|
-/**
|
|
|
- * \def MBEDTLS_SSL_PROTO_TLS1_2
|
|
|
- *
|
|
|
- * Enable support for TLS 1.2 (and DTLS 1.2 if DTLS is enabled).
|
|
|
- *
|
|
|
- * Requires: MBEDTLS_SHA1_C or MBEDTLS_SHA256_C or MBEDTLS_SHA512_C
|
|
|
- * (Depends on ciphersuites)
|
|
|
- *
|
|
|
- * Comment this macro to disable support for TLS 1.2 / DTLS 1.2
|
|
|
- */
|
|
|
-#define MBEDTLS_SSL_PROTO_TLS1_2
|
|
|
-
|
|
|
-/**
|
|
|
- * \def MBEDTLS_SSL_PROTO_DTLS
|
|
|
- *
|
|
|
- * Enable support for DTLS (all available versions).
|
|
|
- *
|
|
|
- * Enable this and MBEDTLS_SSL_PROTO_TLS1_1 to enable DTLS 1.0,
|
|
|
- * and/or this and MBEDTLS_SSL_PROTO_TLS1_2 to enable DTLS 1.2.
|
|
|
- *
|
|
|
- * Requires: MBEDTLS_SSL_PROTO_TLS1_1
|
|
|
- * or MBEDTLS_SSL_PROTO_TLS1_2
|
|
|
- *
|
|
|
- * Comment this macro to disable support for DTLS
|
|
|
- */
|
|
|
-//#define MBEDTLS_SSL_PROTO_DTLS
|
|
|
-
|
|
|
-/**
|
|
|
- * \def MBEDTLS_SSL_ALPN
|
|
|
- *
|
|
|
- * Enable support for RFC 7301 Application Layer Protocol Negotiation.
|
|
|
- *
|
|
|
- * Comment this macro to disable support for ALPN.
|
|
|
- */
|
|
|
-//#define MBEDTLS_SSL_ALPN
|
|
|
-
|
|
|
-/**
|
|
|
- * \def MBEDTLS_SSL_DTLS_ANTI_REPLAY
|
|
|
- *
|
|
|
- * Enable support for the anti-replay mechanism in DTLS.
|
|
|
- *
|
|
|
- * Requires: MBEDTLS_SSL_TLS_C
|
|
|
- * MBEDTLS_SSL_PROTO_DTLS
|
|
|
- *
|
|
|
- * \warning Disabling this is often a security risk!
|
|
|
- * See mbedtls_ssl_conf_dtls_anti_replay() for details.
|
|
|
- *
|
|
|
- * Comment this to disable anti-replay in DTLS.
|
|
|
- */
|
|
|
-//#define MBEDTLS_SSL_DTLS_ANTI_REPLAY
|
|
|
-
|
|
|
-/**
|
|
|
- * \def MBEDTLS_SSL_DTLS_HELLO_VERIFY
|
|
|
- *
|
|
|
- * Enable support for HelloVerifyRequest on DTLS servers.
|
|
|
- *
|
|
|
- * This feature is highly recommended to prevent DTLS servers being used as
|
|
|
- * amplifiers in DoS attacks against other hosts. It should always be enabled
|
|
|
- * unless you know for sure amplification cannot be a problem in the
|
|
|
- * environment in which your server operates.
|
|
|
- *
|
|
|
- * \warning Disabling this can ba a security risk! (see above)
|
|
|
- *
|
|
|
- * Requires: MBEDTLS_SSL_PROTO_DTLS
|
|
|
- *
|
|
|
- * Comment this to disable support for HelloVerifyRequest.
|
|
|
- */
|
|
|
-//#define MBEDTLS_SSL_DTLS_HELLO_VERIFY
|
|
|
-
|
|
|
-/**
|
|
|
- * \def MBEDTLS_SSL_DTLS_CLIENT_PORT_REUSE
|
|
|
- *
|
|
|
- * Enable server-side support for clients that reconnect from the same port.
|
|
|
- *
|
|
|
- * Some clients unexpectedly close the connection and try to reconnect using the
|
|
|
- * same source port. This needs special support from the server to handle the
|
|
|
- * new connection securely, as described in section 4.2.8 of RFC 6347. This
|
|
|
- * flag enables that support.
|
|
|
- *
|
|
|
- * Requires: MBEDTLS_SSL_DTLS_HELLO_VERIFY
|
|
|
- *
|
|
|
- * Comment this to disable support for clients reusing the source port.
|
|
|
- */
|
|
|
-//#define MBEDTLS_SSL_DTLS_CLIENT_PORT_REUSE
|
|
|
-
|
|
|
-/**
|
|
|
- * \def MBEDTLS_SSL_DTLS_BADMAC_LIMIT
|
|
|
- *
|
|
|
- * Enable support for a limit of records with bad MAC.
|
|
|
- *
|
|
|
- * See mbedtls_ssl_conf_dtls_badmac_limit().
|
|
|
- *
|
|
|
- * Requires: MBEDTLS_SSL_PROTO_DTLS
|
|
|
- */
|
|
|
-//#define MBEDTLS_SSL_DTLS_BADMAC_LIMIT
|
|
|
-
|
|
|
-/**
|
|
|
- * \def MBEDTLS_SSL_SESSION_TICKETS
|
|
|
- *
|
|
|
- * Enable support for RFC 5077 session tickets in SSL.
|
|
|
- * Client-side, provides full support for session tickets (maintainance of a
|
|
|
- * session store remains the responsibility of the application, though).
|
|
|
- * Server-side, you also need to provide callbacks for writing and parsing
|
|
|
- * tickets, including authenticated encryption and key management. Example
|
|
|
- * callbacks are provided by MBEDTLS_SSL_TICKET_C.
|
|
|
- *
|
|
|
- * Comment this macro to disable support for SSL session tickets
|
|
|
- */
|
|
|
-//#define MBEDTLS_SSL_SESSION_TICKETS
|
|
|
-
|
|
|
-/**
|
|
|
- * \def MBEDTLS_SSL_EXPORT_KEYS
|
|
|
- *
|
|
|
- * Enable support for exporting key block and master secret.
|
|
|
- * This is required for certain users of TLS, e.g. EAP-TLS.
|
|
|
- *
|
|
|
- * Comment this macro to disable support for key export
|
|
|
- */
|
|
|
-//#define MBEDTLS_SSL_EXPORT_KEYS
|
|
|
-
|
|
|
-/**
|
|
|
- * \def MBEDTLS_SSL_SERVER_NAME_INDICATION
|
|
|
- *
|
|
|
- * Enable support for RFC 6066 server name indication (SNI) in SSL.
|
|
|
- *
|
|
|
- * Requires: MBEDTLS_X509_CRT_PARSE_C
|
|
|
- *
|
|
|
- * Comment this macro to disable support for server name indication in SSL
|
|
|
- */
|
|
|
-#define MBEDTLS_SSL_SERVER_NAME_INDICATION
|
|
|
-
|
|
|
-/**
|
|
|
- * \def MBEDTLS_SSL_TRUNCATED_HMAC
|
|
|
- *
|
|
|
- * Enable support for RFC 6066 truncated HMAC in SSL.
|
|
|
- *
|
|
|
- * Comment this macro to disable support for truncated HMAC in SSL
|
|
|
- */
|
|
|
-//#define MBEDTLS_SSL_TRUNCATED_HMAC
|
|
|
-
|
|
|
-/**
|
|
|
- * \def MBEDTLS_SSL_TRUNCATED_HMAC_COMPAT
|
|
|
- *
|
|
|
- * Fallback to old (pre-2.7), non-conforming implementation of the truncated
|
|
|
- * HMAC extension which also truncates the HMAC key. Note that this option is
|
|
|
- * only meant for a transitory upgrade period and is likely to be removed in
|
|
|
- * a future version of the library.
|
|
|
- *
|
|
|
- * \warning The old implementation is non-compliant and has a security weakness
|
|
|
- * (2^80 brute force attack on the HMAC key used for a single,
|
|
|
- * uninterrupted connection). This should only be enabled temporarily
|
|
|
- * when (1) the use of truncated HMAC is essential in order to save
|
|
|
- * bandwidth, and (2) the peer is an Mbed TLS stack that doesn't use
|
|
|
- * the fixed implementation yet (pre-2.7).
|
|
|
- *
|
|
|
- * \deprecated This option is deprecated and will likely be removed in a
|
|
|
- * future version of Mbed TLS.
|
|
|
- *
|
|
|
- * Uncomment to fallback to old, non-compliant truncated HMAC implementation.
|
|
|
- *
|
|
|
- * Requires: MBEDTLS_SSL_TRUNCATED_HMAC
|
|
|
- */
|
|
|
-//#define MBEDTLS_SSL_TRUNCATED_HMAC_COMPAT
|
|
|
-
|
|
|
-/**
|
|
|
- * \def MBEDTLS_THREADING_ALT
|
|
|
- *
|
|
|
- * Provide your own alternate threading implementation.
|
|
|
- *
|
|
|
- * Requires: MBEDTLS_THREADING_C
|
|
|
- *
|
|
|
- * Uncomment this to allow your own alternate threading implementation.
|
|
|
- */
|
|
|
-//#define MBEDTLS_THREADING_ALT
|
|
|
-
|
|
|
-/**
|
|
|
- * \def MBEDTLS_THREADING_PTHREAD
|
|
|
- *
|
|
|
- * Enable the pthread wrapper layer for the threading layer.
|
|
|
- *
|
|
|
- * Requires: MBEDTLS_THREADING_C
|
|
|
- *
|
|
|
- * Uncomment this to enable pthread mutexes.
|
|
|
- */
|
|
|
-//#define MBEDTLS_THREADING_PTHREAD
|
|
|
-
|
|
|
-/**
|
|
|
- * \def MBEDTLS_VERSION_FEATURES
|
|
|
- *
|
|
|
- * Allow run-time checking of compile-time enabled features. Thus allowing users
|
|
|
- * to check at run-time if the library is for instance compiled with threading
|
|
|
- * support via mbedtls_version_check_feature().
|
|
|
- *
|
|
|
- * Requires: MBEDTLS_VERSION_C
|
|
|
- *
|
|
|
- * Comment this to disable run-time checking and save ROM space
|
|
|
- */
|
|
|
-//#define MBEDTLS_VERSION_FEATURES
|
|
|
-
|
|
|
-/**
|
|
|
- * \def MBEDTLS_X509_ALLOW_EXTENSIONS_NON_V3
|
|
|
- *
|
|
|
- * If set, the X509 parser will not break-off when parsing an X509 certificate
|
|
|
- * and encountering an extension in a v1 or v2 certificate.
|
|
|
- *
|
|
|
- * Uncomment to prevent an error.
|
|
|
- */
|
|
|
-//#define MBEDTLS_X509_ALLOW_EXTENSIONS_NON_V3
|
|
|
-
|
|
|
-/**
|
|
|
- * \def MBEDTLS_X509_ALLOW_UNSUPPORTED_CRITICAL_EXTENSION
|
|
|
- *
|
|
|
- * If set, the X509 parser will not break-off when parsing an X509 certificate
|
|
|
- * and encountering an unknown critical extension.
|
|
|
- *
|
|
|
- * \warning Depending on your PKI use, enabling this can be a security risk!
|
|
|
- *
|
|
|
- * Uncomment to prevent an error.
|
|
|
- */
|
|
|
-//#define MBEDTLS_X509_ALLOW_UNSUPPORTED_CRITICAL_EXTENSION
|
|
|
-
|
|
|
-/**
|
|
|
- * \def MBEDTLS_X509_CHECK_KEY_USAGE
|
|
|
- *
|
|
|
- * Enable verification of the keyUsage extension (CA and leaf certificates).
|
|
|
- *
|
|
|
- * Disabling this avoids problems with mis-issued and/or misused
|
|
|
- * (intermediate) CA and leaf certificates.
|
|
|
- *
|
|
|
- * \warning Depending on your PKI use, disabling this can be a security risk!
|
|
|
- *
|
|
|
- * Comment to skip keyUsage checking for both CA and leaf certificates.
|
|
|
- */
|
|
|
-//#define MBEDTLS_X509_CHECK_KEY_USAGE
|
|
|
-
|
|
|
-/**
|
|
|
- * \def MBEDTLS_X509_CHECK_EXTENDED_KEY_USAGE
|
|
|
- *
|
|
|
- * Enable verification of the extendedKeyUsage extension (leaf certificates).
|
|
|
- *
|
|
|
- * Disabling this avoids problems with mis-issued and/or misused certificates.
|
|
|
- *
|
|
|
- * \warning Depending on your PKI use, disabling this can be a security risk!
|
|
|
- *
|
|
|
- * Comment to skip extendedKeyUsage checking for certificates.
|
|
|
- */
|
|
|
-//#define MBEDTLS_X509_CHECK_EXTENDED_KEY_USAGE
|
|
|
-
|
|
|
-/**
|
|
|
- * \def MBEDTLS_X509_RSASSA_PSS_SUPPORT
|
|
|
- *
|
|
|
- * Enable parsing and verification of X.509 certificates, CRLs and CSRS
|
|
|
- * signed with RSASSA-PSS (aka PKCS#1 v2.1).
|
|
|
- *
|
|
|
- * Comment this macro to disallow using RSASSA-PSS in certificates.
|
|
|
- */
|
|
|
-//#define MBEDTLS_X509_RSASSA_PSS_SUPPORT
|
|
|
-
|
|
|
-/**
|
|
|
- * \def MBEDTLS_ZLIB_SUPPORT
|
|
|
- *
|
|
|
- * If set, the SSL/TLS module uses ZLIB to support compression and
|
|
|
- * decompression of packet data.
|
|
|
- *
|
|
|
- * \warning TLS-level compression MAY REDUCE SECURITY! See for example the
|
|
|
- * CRIME attack. Before enabling this option, you should examine with care if
|
|
|
- * CRIME or similar exploits may be a applicable to your use case.
|
|
|
- *
|
|
|
- * \note Currently compression can't be used with DTLS.
|
|
|
- *
|
|
|
- * Used in: library/ssl_tls.c
|
|
|
- * library/ssl_cli.c
|
|
|
- * library/ssl_srv.c
|
|
|
- *
|
|
|
- * This feature requires zlib library and headers to be present.
|
|
|
- *
|
|
|
- * Uncomment to enable use of ZLIB
|
|
|
- */
|
|
|
-//#define MBEDTLS_ZLIB_SUPPORT
|
|
|
-/* \} name SECTION: mbed TLS feature support */
|
|
|
-
|
|
|
-/**
|
|
|
- * \name SECTION: mbed TLS modules
|
|
|
- *
|
|
|
- * This section enables or disables entire modules in mbed TLS
|
|
|
- * \{
|
|
|
- */
|
|
|
-
|
|
|
-/**
|
|
|
- * \def MBEDTLS_AESNI_C
|
|
|
- *
|
|
|
- * Enable AES-NI support on x86-64.
|
|
|
- *
|
|
|
- * Module: library/aesni.c
|
|
|
- * Caller: library/aes.c
|
|
|
- *
|
|
|
- * Requires: MBEDTLS_HAVE_ASM
|
|
|
- *
|
|
|
- * This modules adds support for the AES-NI instructions on x86-64
|
|
|
- */
|
|
|
-//#define MBEDTLS_AESNI_C
|
|
|
-
|
|
|
-/**
|
|
|
- * \def MBEDTLS_AES_C
|
|
|
- *
|
|
|
- * Enable the AES block cipher.
|
|
|
- *
|
|
|
- * Module: library/aes.c
|
|
|
- * Caller: library/ssl_tls.c
|
|
|
- * library/pem.c
|
|
|
- * library/ctr_drbg.c
|
|
|
- *
|
|
|
- * This module enables the following ciphersuites (if other requisites are
|
|
|
- * enabled as well):
|
|
|
- * MBEDTLS_TLS_ECDH_ECDSA_WITH_AES_128_CBC_SHA
|
|
|
- * MBEDTLS_TLS_ECDH_ECDSA_WITH_AES_256_CBC_SHA
|
|
|
- * MBEDTLS_TLS_ECDH_RSA_WITH_AES_128_CBC_SHA
|
|
|
- * MBEDTLS_TLS_ECDH_RSA_WITH_AES_256_CBC_SHA
|
|
|
- * MBEDTLS_TLS_ECDH_ECDSA_WITH_AES_128_CBC_SHA256
|
|
|
- * MBEDTLS_TLS_ECDH_ECDSA_WITH_AES_256_CBC_SHA384
|
|
|
- * MBEDTLS_TLS_ECDH_RSA_WITH_AES_128_CBC_SHA256
|
|
|
- * MBEDTLS_TLS_ECDH_RSA_WITH_AES_256_CBC_SHA384
|
|
|
- * MBEDTLS_TLS_ECDH_ECDSA_WITH_AES_128_GCM_SHA256
|
|
|
- * MBEDTLS_TLS_ECDH_ECDSA_WITH_AES_256_GCM_SHA384
|
|
|
- * MBEDTLS_TLS_ECDH_RSA_WITH_AES_128_GCM_SHA256
|
|
|
- * MBEDTLS_TLS_ECDH_RSA_WITH_AES_256_GCM_SHA384
|
|
|
- * MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384
|
|
|
- * MBEDTLS_TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384
|
|
|
- * MBEDTLS_TLS_DHE_RSA_WITH_AES_256_GCM_SHA384
|
|
|
- * MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA384
|
|
|
- * MBEDTLS_TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA384
|
|
|
- * MBEDTLS_TLS_DHE_RSA_WITH_AES_256_CBC_SHA256
|
|
|
- * MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA
|
|
|
- * MBEDTLS_TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA
|
|
|
- * MBEDTLS_TLS_DHE_RSA_WITH_AES_256_CBC_SHA
|
|
|
- * MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256
|
|
|
- * MBEDTLS_TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256
|
|
|
- * MBEDTLS_TLS_DHE_RSA_WITH_AES_128_GCM_SHA256
|
|
|
- * MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA256
|
|
|
- * MBEDTLS_TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256
|
|
|
- * MBEDTLS_TLS_DHE_RSA_WITH_AES_128_CBC_SHA256
|
|
|
- * MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA
|
|
|
- * MBEDTLS_TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA
|
|
|
- * MBEDTLS_TLS_DHE_RSA_WITH_AES_128_CBC_SHA
|
|
|
- * MBEDTLS_TLS_DHE_PSK_WITH_AES_256_GCM_SHA384
|
|
|
- * MBEDTLS_TLS_ECDHE_PSK_WITH_AES_256_CBC_SHA384
|
|
|
- * MBEDTLS_TLS_DHE_PSK_WITH_AES_256_CBC_SHA384
|
|
|
- * MBEDTLS_TLS_ECDHE_PSK_WITH_AES_256_CBC_SHA
|
|
|
- * MBEDTLS_TLS_DHE_PSK_WITH_AES_256_CBC_SHA
|
|
|
- * MBEDTLS_TLS_DHE_PSK_WITH_AES_128_GCM_SHA256
|
|
|
- * MBEDTLS_TLS_ECDHE_PSK_WITH_AES_128_CBC_SHA256
|
|
|
- * MBEDTLS_TLS_DHE_PSK_WITH_AES_128_CBC_SHA256
|
|
|
- * MBEDTLS_TLS_ECDHE_PSK_WITH_AES_128_CBC_SHA
|
|
|
- * MBEDTLS_TLS_DHE_PSK_WITH_AES_128_CBC_SHA
|
|
|
- * MBEDTLS_TLS_RSA_WITH_AES_256_GCM_SHA384
|
|
|
- * MBEDTLS_TLS_RSA_WITH_AES_256_CBC_SHA256
|
|
|
- * MBEDTLS_TLS_RSA_WITH_AES_256_CBC_SHA
|
|
|
- * MBEDTLS_TLS_RSA_WITH_AES_128_GCM_SHA256
|
|
|
- * MBEDTLS_TLS_RSA_WITH_AES_128_CBC_SHA256
|
|
|
- * MBEDTLS_TLS_RSA_WITH_AES_128_CBC_SHA
|
|
|
- * MBEDTLS_TLS_RSA_PSK_WITH_AES_256_GCM_SHA384
|
|
|
- * MBEDTLS_TLS_RSA_PSK_WITH_AES_256_CBC_SHA384
|
|
|
- * MBEDTLS_TLS_RSA_PSK_WITH_AES_256_CBC_SHA
|
|
|
- * MBEDTLS_TLS_RSA_PSK_WITH_AES_128_GCM_SHA256
|
|
|
- * MBEDTLS_TLS_RSA_PSK_WITH_AES_128_CBC_SHA256
|
|
|
- * MBEDTLS_TLS_RSA_PSK_WITH_AES_128_CBC_SHA
|
|
|
- * MBEDTLS_TLS_PSK_WITH_AES_256_GCM_SHA384
|
|
|
- * MBEDTLS_TLS_PSK_WITH_AES_256_CBC_SHA384
|
|
|
- * MBEDTLS_TLS_PSK_WITH_AES_256_CBC_SHA
|
|
|
- * MBEDTLS_TLS_PSK_WITH_AES_128_GCM_SHA256
|
|
|
- * MBEDTLS_TLS_PSK_WITH_AES_128_CBC_SHA256
|
|
|
- * MBEDTLS_TLS_PSK_WITH_AES_128_CBC_SHA
|
|
|
- *
|
|
|
- * PEM_PARSE uses AES for decrypting encrypted keys.
|
|
|
- */
|
|
|
-#define MBEDTLS_AES_C
|
|
|
-
|
|
|
-/**
|
|
|
- * \def MBEDTLS_ARC4_C
|
|
|
- *
|
|
|
- * Enable the ARCFOUR stream cipher.
|
|
|
- *
|
|
|
- * Module: library/arc4.c
|
|
|
- * Caller: library/ssl_tls.c
|
|
|
- *
|
|
|
- * This module enables the following ciphersuites (if other requisites are
|
|
|
- * enabled as well):
|
|
|
- * MBEDTLS_TLS_ECDH_ECDSA_WITH_RC4_128_SHA
|
|
|
- * MBEDTLS_TLS_ECDH_RSA_WITH_RC4_128_SHA
|
|
|
- * MBEDTLS_TLS_ECDHE_ECDSA_WITH_RC4_128_SHA
|
|
|
- * MBEDTLS_TLS_ECDHE_RSA_WITH_RC4_128_SHA
|
|
|
- * MBEDTLS_TLS_ECDHE_PSK_WITH_RC4_128_SHA
|
|
|
- * MBEDTLS_TLS_DHE_PSK_WITH_RC4_128_SHA
|
|
|
- * MBEDTLS_TLS_RSA_WITH_RC4_128_SHA
|
|
|
- * MBEDTLS_TLS_RSA_WITH_RC4_128_MD5
|
|
|
- * MBEDTLS_TLS_RSA_PSK_WITH_RC4_128_SHA
|
|
|
- * MBEDTLS_TLS_PSK_WITH_RC4_128_SHA
|
|
|
- *
|
|
|
- * \warning ARC4 is considered a weak cipher and its use constitutes a
|
|
|
- * security risk. If possible, we recommend avoidng dependencies on
|
|
|
- * it, and considering stronger ciphers instead.
|
|
|
- *
|
|
|
- */
|
|
|
-// #define MBEDTLS_ARC4_C
|
|
|
-
|
|
|
-/**
|
|
|
- * \def MBEDTLS_ASN1_PARSE_C
|
|
|
- *
|
|
|
- * Enable the generic ASN1 parser.
|
|
|
- *
|
|
|
- * Module: library/asn1.c
|
|
|
- * Caller: library/x509.c
|
|
|
- * library/dhm.c
|
|
|
- * library/pkcs12.c
|
|
|
- * library/pkcs5.c
|
|
|
- * library/pkparse.c
|
|
|
- */
|
|
|
-#define MBEDTLS_ASN1_PARSE_C
|
|
|
-
|
|
|
-/**
|
|
|
- * \def MBEDTLS_ASN1_WRITE_C
|
|
|
- *
|
|
|
- * Enable the generic ASN1 writer.
|
|
|
- *
|
|
|
- * Module: library/asn1write.c
|
|
|
- * Caller: library/ecdsa.c
|
|
|
- * library/pkwrite.c
|
|
|
- * library/x509_create.c
|
|
|
- * library/x509write_crt.c
|
|
|
- * library/x509write_csr.c
|
|
|
- */
|
|
|
-// #define MBEDTLS_ASN1_WRITE_C
|
|
|
-
|
|
|
-/**
|
|
|
- * \def MBEDTLS_BASE64_C
|
|
|
- *
|
|
|
- * Enable the Base64 module.
|
|
|
- *
|
|
|
- * Module: library/base64.c
|
|
|
- * Caller: library/pem.c
|
|
|
- *
|
|
|
- * This module is required for PEM support (required by X.509).
|
|
|
- */
|
|
|
-#define MBEDTLS_BASE64_C
|
|
|
-
|
|
|
-/**
|
|
|
- * \def MBEDTLS_BIGNUM_C
|
|
|
- *
|
|
|
- * Enable the multi-precision integer library.
|
|
|
- *
|
|
|
- * Module: library/bignum.c
|
|
|
- * Caller: library/dhm.c
|
|
|
- * library/ecp.c
|
|
|
- * library/ecdsa.c
|
|
|
- * library/rsa.c
|
|
|
- * library/rsa_internal.c
|
|
|
- * library/ssl_tls.c
|
|
|
- *
|
|
|
- * This module is required for RSA, DHM and ECC (ECDH, ECDSA) support.
|
|
|
- */
|
|
|
-#define MBEDTLS_BIGNUM_C
|
|
|
-
|
|
|
-/**
|
|
|
- * \def MBEDTLS_BLOWFISH_C
|
|
|
- *
|
|
|
- * Enable the Blowfish block cipher.
|
|
|
- *
|
|
|
- * Module: library/blowfish.c
|
|
|
- */
|
|
|
-//#define MBEDTLS_BLOWFISH_C
|
|
|
-
|
|
|
-/**
|
|
|
- * \def MBEDTLS_CAMELLIA_C
|
|
|
- *
|
|
|
- * Enable the Camellia block cipher.
|
|
|
- *
|
|
|
- * Module: library/camellia.c
|
|
|
- * Caller: library/ssl_tls.c
|
|
|
- *
|
|
|
- * This module enables the following ciphersuites (if other requisites are
|
|
|
- * enabled as well):
|
|
|
- * MBEDTLS_TLS_ECDH_ECDSA_WITH_CAMELLIA_128_CBC_SHA256
|
|
|
- * MBEDTLS_TLS_ECDH_ECDSA_WITH_CAMELLIA_256_CBC_SHA384
|
|
|
- * MBEDTLS_TLS_ECDH_RSA_WITH_CAMELLIA_128_CBC_SHA256
|
|
|
- * MBEDTLS_TLS_ECDH_RSA_WITH_CAMELLIA_256_CBC_SHA384
|
|
|
- * MBEDTLS_TLS_ECDH_ECDSA_WITH_CAMELLIA_128_GCM_SHA256
|
|
|
- * MBEDTLS_TLS_ECDH_ECDSA_WITH_CAMELLIA_256_GCM_SHA384
|
|
|
- * MBEDTLS_TLS_ECDH_RSA_WITH_CAMELLIA_128_GCM_SHA256
|
|
|
- * MBEDTLS_TLS_ECDH_RSA_WITH_CAMELLIA_256_GCM_SHA384
|
|
|
- * MBEDTLS_TLS_ECDHE_ECDSA_WITH_CAMELLIA_256_GCM_SHA384
|
|
|
- * MBEDTLS_TLS_ECDHE_RSA_WITH_CAMELLIA_256_GCM_SHA384
|
|
|
- * MBEDTLS_TLS_DHE_RSA_WITH_CAMELLIA_256_GCM_SHA384
|
|
|
- * MBEDTLS_TLS_ECDHE_ECDSA_WITH_CAMELLIA_256_CBC_SHA384
|
|
|
- * MBEDTLS_TLS_ECDHE_RSA_WITH_CAMELLIA_256_CBC_SHA384
|
|
|
- * MBEDTLS_TLS_DHE_RSA_WITH_CAMELLIA_256_CBC_SHA256
|
|
|
- * MBEDTLS_TLS_DHE_RSA_WITH_CAMELLIA_256_CBC_SHA
|
|
|
- * MBEDTLS_TLS_ECDHE_ECDSA_WITH_CAMELLIA_128_GCM_SHA256
|
|
|
- * MBEDTLS_TLS_ECDHE_RSA_WITH_CAMELLIA_128_GCM_SHA256
|
|
|
- * MBEDTLS_TLS_DHE_RSA_WITH_CAMELLIA_128_GCM_SHA256
|
|
|
- * MBEDTLS_TLS_ECDHE_ECDSA_WITH_CAMELLIA_128_CBC_SHA256
|
|
|
- * MBEDTLS_TLS_ECDHE_RSA_WITH_CAMELLIA_128_CBC_SHA256
|
|
|
- * MBEDTLS_TLS_DHE_RSA_WITH_CAMELLIA_128_CBC_SHA256
|
|
|
- * MBEDTLS_TLS_DHE_RSA_WITH_CAMELLIA_128_CBC_SHA
|
|
|
- * MBEDTLS_TLS_DHE_PSK_WITH_CAMELLIA_256_GCM_SHA384
|
|
|
- * MBEDTLS_TLS_ECDHE_PSK_WITH_CAMELLIA_256_CBC_SHA384
|
|
|
- * MBEDTLS_TLS_DHE_PSK_WITH_CAMELLIA_256_CBC_SHA384
|
|
|
- * MBEDTLS_TLS_DHE_PSK_WITH_CAMELLIA_128_GCM_SHA256
|
|
|
- * MBEDTLS_TLS_DHE_PSK_WITH_CAMELLIA_128_CBC_SHA256
|
|
|
- * MBEDTLS_TLS_ECDHE_PSK_WITH_CAMELLIA_128_CBC_SHA256
|
|
|
- * MBEDTLS_TLS_RSA_WITH_CAMELLIA_256_GCM_SHA384
|
|
|
- * MBEDTLS_TLS_RSA_WITH_CAMELLIA_256_CBC_SHA256
|
|
|
- * MBEDTLS_TLS_RSA_WITH_CAMELLIA_256_CBC_SHA
|
|
|
- * MBEDTLS_TLS_RSA_WITH_CAMELLIA_128_GCM_SHA256
|
|
|
- * MBEDTLS_TLS_RSA_WITH_CAMELLIA_128_CBC_SHA256
|
|
|
- * MBEDTLS_TLS_RSA_WITH_CAMELLIA_128_CBC_SHA
|
|
|
- * MBEDTLS_TLS_RSA_PSK_WITH_CAMELLIA_256_GCM_SHA384
|
|
|
- * MBEDTLS_TLS_RSA_PSK_WITH_CAMELLIA_256_CBC_SHA384
|
|
|
- * MBEDTLS_TLS_RSA_PSK_WITH_CAMELLIA_128_GCM_SHA256
|
|
|
- * MBEDTLS_TLS_RSA_PSK_WITH_CAMELLIA_128_CBC_SHA256
|
|
|
- * MBEDTLS_TLS_PSK_WITH_CAMELLIA_256_GCM_SHA384
|
|
|
- * MBEDTLS_TLS_PSK_WITH_CAMELLIA_256_CBC_SHA384
|
|
|
- * MBEDTLS_TLS_PSK_WITH_CAMELLIA_128_GCM_SHA256
|
|
|
- * MBEDTLS_TLS_PSK_WITH_CAMELLIA_128_CBC_SHA256
|
|
|
- */
|
|
|
-//#define MBEDTLS_CAMELLIA_C
|
|
|
-
|
|
|
-/**
|
|
|
- * \def MBEDTLS_CCM_C
|
|
|
- *
|
|
|
- * Enable the Counter with CBC-MAC (CCM) mode for 128-bit block cipher.
|
|
|
- *
|
|
|
- * Module: library/ccm.c
|
|
|
- *
|
|
|
- * Requires: MBEDTLS_AES_C or MBEDTLS_CAMELLIA_C
|
|
|
- *
|
|
|
- * This module enables the AES-CCM ciphersuites, if other requisites are
|
|
|
- * enabled as well.
|
|
|
- */
|
|
|
-//#define MBEDTLS_CCM_C
|
|
|
-
|
|
|
-/**
|
|
|
- * \def MBEDTLS_CERTS_C
|
|
|
- *
|
|
|
- * Enable the test certificates.
|
|
|
- *
|
|
|
- * Module: library/certs.c
|
|
|
- * Caller:
|
|
|
- *
|
|
|
- * This module is used for testing (ssl_client/server).
|
|
|
- */
|
|
|
-//#define MBEDTLS_CERTS_C
|
|
|
-
|
|
|
-/**
|
|
|
- * \def MBEDTLS_CIPHER_C
|
|
|
- *
|
|
|
- * Enable the generic cipher layer.
|
|
|
- *
|
|
|
- * Module: library/cipher.c
|
|
|
- * Caller: library/ssl_tls.c
|
|
|
- *
|
|
|
- * Uncomment to enable generic cipher wrappers.
|
|
|
- */
|
|
|
-#define MBEDTLS_CIPHER_C
|
|
|
-
|
|
|
-/**
|
|
|
- * \def MBEDTLS_CMAC_C
|
|
|
- *
|
|
|
- * Enable the CMAC (Cipher-based Message Authentication Code) mode for block
|
|
|
- * ciphers.
|
|
|
- *
|
|
|
- * Module: library/cmac.c
|
|
|
- *
|
|
|
- * Requires: MBEDTLS_AES_C or MBEDTLS_DES_C
|
|
|
- *
|
|
|
- */
|
|
|
-//#define MBEDTLS_CMAC_C
|
|
|
-
|
|
|
-/**
|
|
|
- * \def MBEDTLS_CTR_DRBG_C
|
|
|
- *
|
|
|
- * Enable the CTR_DRBG AES-256-based random generator.
|
|
|
- *
|
|
|
- * Module: library/ctr_drbg.c
|
|
|
- * Caller:
|
|
|
- *
|
|
|
- * Requires: MBEDTLS_AES_C
|
|
|
- *
|
|
|
- * This module provides the CTR_DRBG AES-256 random number generator.
|
|
|
- */
|
|
|
-#define MBEDTLS_CTR_DRBG_C
|
|
|
-
|
|
|
-/**
|
|
|
- * \def MBEDTLS_DEBUG_C
|
|
|
- *
|
|
|
- * Enable the debug functions.
|
|
|
- *
|
|
|
- * Module: library/debug.c
|
|
|
- * Caller: library/ssl_cli.c
|
|
|
- * library/ssl_srv.c
|
|
|
- * library/ssl_tls.c
|
|
|
- *
|
|
|
- * This module provides debugging functions.
|
|
|
- */
|
|
|
-// #define MBEDTLS_DEBUG_C
|
|
|
-
|
|
|
-/**
|
|
|
- * \def MBEDTLS_DES_C
|
|
|
- *
|
|
|
- * Enable the DES block cipher.
|
|
|
- *
|
|
|
- * Module: library/des.c
|
|
|
- * Caller: library/pem.c
|
|
|
- * library/ssl_tls.c
|
|
|
- *
|
|
|
- * This module enables the following ciphersuites (if other requisites are
|
|
|
- * enabled as well):
|
|
|
- * MBEDTLS_TLS_ECDH_ECDSA_WITH_3DES_EDE_CBC_SHA
|
|
|
- * MBEDTLS_TLS_ECDH_RSA_WITH_3DES_EDE_CBC_SHA
|
|
|
- * MBEDTLS_TLS_ECDHE_ECDSA_WITH_3DES_EDE_CBC_SHA
|
|
|
- * MBEDTLS_TLS_ECDHE_RSA_WITH_3DES_EDE_CBC_SHA
|
|
|
- * MBEDTLS_TLS_DHE_RSA_WITH_3DES_EDE_CBC_SHA
|
|
|
- * MBEDTLS_TLS_ECDHE_PSK_WITH_3DES_EDE_CBC_SHA
|
|
|
- * MBEDTLS_TLS_DHE_PSK_WITH_3DES_EDE_CBC_SHA
|
|
|
- * MBEDTLS_TLS_RSA_WITH_3DES_EDE_CBC_SHA
|
|
|
- * MBEDTLS_TLS_RSA_PSK_WITH_3DES_EDE_CBC_SHA
|
|
|
- * MBEDTLS_TLS_PSK_WITH_3DES_EDE_CBC_SHA
|
|
|
- *
|
|
|
- * PEM_PARSE uses DES/3DES for decrypting encrypted keys.
|
|
|
- *
|
|
|
- * \warning DES is considered a weak cipher and its use constitutes a
|
|
|
- * security risk. We recommend considering stronger ciphers instead.
|
|
|
- */
|
|
|
-#define MBEDTLS_DES_C
|
|
|
-
|
|
|
-/**
|
|
|
- * \def MBEDTLS_DHM_C
|
|
|
- *
|
|
|
- * Enable the Diffie-Hellman-Merkle module.
|
|
|
- *
|
|
|
- * Module: library/dhm.c
|
|
|
- * Caller: library/ssl_cli.c
|
|
|
- * library/ssl_srv.c
|
|
|
- *
|
|
|
- * This module is used by the following key exchanges:
|
|
|
- * DHE-RSA, DHE-PSK
|
|
|
- *
|
|
|
- * \warning Using DHE constitutes a security risk as it
|
|
|
- * is not possible to validate custom DH parameters.
|
|
|
- * If possible, it is recommended users should consider
|
|
|
- * preferring other methods of key exchange.
|
|
|
- * See dhm.h for more details.
|
|
|
- *
|
|
|
- */
|
|
|
-//#define MBEDTLS_DHM_C
|
|
|
-
|
|
|
-/**
|
|
|
- * \def MBEDTLS_ECDH_C
|
|
|
- *
|
|
|
- * Enable the elliptic curve Diffie-Hellman library.
|
|
|
- *
|
|
|
- * Module: library/ecdh.c
|
|
|
- * Caller: library/ssl_cli.c
|
|
|
- * library/ssl_srv.c
|
|
|
- *
|
|
|
- * This module is used by the following key exchanges:
|
|
|
- * ECDHE-ECDSA, ECDHE-RSA, DHE-PSK
|
|
|
- *
|
|
|
- * Requires: MBEDTLS_ECP_C
|
|
|
- */
|
|
|
-#define MBEDTLS_ECDH_C
|
|
|
-
|
|
|
-/**
|
|
|
- * \def MBEDTLS_ECDSA_C
|
|
|
- *
|
|
|
- * Enable the elliptic curve DSA library.
|
|
|
- *
|
|
|
- * Module: library/ecdsa.c
|
|
|
- * Caller:
|
|
|
- *
|
|
|
- * This module is used by the following key exchanges:
|
|
|
- * ECDHE-ECDSA
|
|
|
- *
|
|
|
- * Requires: MBEDTLS_ECP_C, MBEDTLS_ASN1_WRITE_C, MBEDTLS_ASN1_PARSE_C
|
|
|
- */
|
|
|
-//#define MBEDTLS_ECDSA_C
|
|
|
-
|
|
|
-/**
|
|
|
- * \def MBEDTLS_ECJPAKE_C
|
|
|
- *
|
|
|
- * Enable the elliptic curve J-PAKE library.
|
|
|
- *
|
|
|
- * \warning This is currently experimental. EC J-PAKE support is based on the
|
|
|
- * Thread v1.0.0 specification; incompatible changes to the specification
|
|
|
- * might still happen. For this reason, this is disabled by default.
|
|
|
- *
|
|
|
- * Module: library/ecjpake.c
|
|
|
- * Caller:
|
|
|
- *
|
|
|
- * This module is used by the following key exchanges:
|
|
|
- * ECJPAKE
|
|
|
- *
|
|
|
- * Requires: MBEDTLS_ECP_C, MBEDTLS_MD_C
|
|
|
- */
|
|
|
-//#define MBEDTLS_ECJPAKE_C
|
|
|
-
|
|
|
-/**
|
|
|
- * \def MBEDTLS_ECP_C
|
|
|
- *
|
|
|
- * Enable the elliptic curve over GF(p) library.
|
|
|
- *
|
|
|
- * Module: library/ecp.c
|
|
|
- * Caller: library/ecdh.c
|
|
|
- * library/ecdsa.c
|
|
|
- * library/ecjpake.c
|
|
|
- *
|
|
|
- * Requires: MBEDTLS_BIGNUM_C and at least one MBEDTLS_ECP_DP_XXX_ENABLED
|
|
|
- */
|
|
|
-#define MBEDTLS_ECP_C
|
|
|
-
|
|
|
-/**
|
|
|
- * \def MBEDTLS_ENTROPY_C
|
|
|
- *
|
|
|
- * Enable the platform-specific entropy code.
|
|
|
- *
|
|
|
- * Module: library/entropy.c
|
|
|
- * Caller:
|
|
|
- *
|
|
|
- * Requires: MBEDTLS_SHA512_C or MBEDTLS_SHA256_C
|
|
|
- *
|
|
|
- * This module provides a generic entropy pool
|
|
|
- */
|
|
|
-#define MBEDTLS_ENTROPY_C
|
|
|
-
|
|
|
-/**
|
|
|
- * \def MBEDTLS_ERROR_C
|
|
|
- *
|
|
|
- * Enable error code to error string conversion.
|
|
|
- *
|
|
|
- * Module: library/error.c
|
|
|
- * Caller:
|
|
|
- *
|
|
|
- * This module enables mbedtls_strerror().
|
|
|
- */
|
|
|
-//#define MBEDTLS_ERROR_C
|
|
|
-
|
|
|
-/**
|
|
|
- * \def MBEDTLS_GCM_C
|
|
|
- *
|
|
|
- * Enable the Galois/Counter Mode (GCM) for AES.
|
|
|
- *
|
|
|
- * Module: library/gcm.c
|
|
|
- *
|
|
|
- * Requires: MBEDTLS_AES_C or MBEDTLS_CAMELLIA_C
|
|
|
- *
|
|
|
- * This module enables the AES-GCM and CAMELLIA-GCM ciphersuites, if other
|
|
|
- * requisites are enabled as well.
|
|
|
- */
|
|
|
-#define MBEDTLS_GCM_C
|
|
|
-
|
|
|
-/**
|
|
|
- * \def MBEDTLS_HAVEGE_C
|
|
|
- *
|
|
|
- * Enable the HAVEGE random generator.
|
|
|
- *
|
|
|
- * Warning: the HAVEGE random generator is not suitable for virtualized
|
|
|
- * environments
|
|
|
- *
|
|
|
- * Warning: the HAVEGE random generator is dependent on timing and specific
|
|
|
- * processor traits. It is therefore not advised to use HAVEGE as
|
|
|
- * your applications primary random generator or primary entropy pool
|
|
|
- * input. As a secondary input to your entropy pool, it IS able add
|
|
|
- * the (limited) extra entropy it provides.
|
|
|
- *
|
|
|
- * Module: library/havege.c
|
|
|
- * Caller:
|
|
|
- *
|
|
|
- * Requires: MBEDTLS_TIMING_C
|
|
|
- *
|
|
|
- * Uncomment to enable the HAVEGE random generator.
|
|
|
- */
|
|
|
-//#define MBEDTLS_HAVEGE_C
|
|
|
-
|
|
|
-/**
|
|
|
- * \def MBEDTLS_HMAC_DRBG_C
|
|
|
- *
|
|
|
- * Enable the HMAC_DRBG random generator.
|
|
|
- *
|
|
|
- * Module: library/hmac_drbg.c
|
|
|
- * Caller:
|
|
|
- *
|
|
|
- * Requires: MBEDTLS_MD_C
|
|
|
- *
|
|
|
- * Uncomment to enable the HMAC_DRBG random number geerator.
|
|
|
- */
|
|
|
-#define MBEDTLS_HMAC_DRBG_C
|
|
|
-
|
|
|
-/**
|
|
|
- * \def MBEDTLS_MD_C
|
|
|
- *
|
|
|
- * Enable the generic message digest layer.
|
|
|
- *
|
|
|
- * Module: library/md.c
|
|
|
- * Caller:
|
|
|
- *
|
|
|
- * Uncomment to enable generic message digest wrappers.
|
|
|
- */
|
|
|
-#define MBEDTLS_MD_C
|
|
|
-
|
|
|
-/**
|
|
|
- * \def MBEDTLS_MD2_C
|
|
|
- *
|
|
|
- * Enable the MD2 hash algorithm.
|
|
|
- *
|
|
|
- * Module: library/md2.c
|
|
|
- * Caller:
|
|
|
- *
|
|
|
- * Uncomment to enable support for (rare) MD2-signed X.509 certs.
|
|
|
- *
|
|
|
- * \warning MD2 is considered a weak message digest and its use constitutes a
|
|
|
- * security risk. If possible, we recommend avoiding dependencies on
|
|
|
- * it, and considering stronger message digests instead.
|
|
|
- *
|
|
|
- */
|
|
|
-//#define MBEDTLS_MD2_C
|
|
|
-
|
|
|
-/**
|
|
|
- * \def MBEDTLS_MD4_C
|
|
|
- *
|
|
|
- * Enable the MD4 hash algorithm.
|
|
|
- *
|
|
|
- * Module: library/md4.c
|
|
|
- * Caller:
|
|
|
- *
|
|
|
- * Uncomment to enable support for (rare) MD4-signed X.509 certs.
|
|
|
- *
|
|
|
- * \warning MD4 is considered a weak message digest and its use constitutes a
|
|
|
- * security risk. If possible, we recommend avoiding dependencies on
|
|
|
- * it, and considering stronger message digests instead.
|
|
|
- *
|
|
|
- */
|
|
|
-//#define MBEDTLS_MD4_C
|
|
|
-
|
|
|
-/**
|
|
|
- * \def MBEDTLS_MD5_C
|
|
|
- *
|
|
|
- * Enable the MD5 hash algorithm.
|
|
|
- *
|
|
|
- * Module: library/md5.c
|
|
|
- * Caller: library/md.c
|
|
|
- * library/pem.c
|
|
|
- * library/ssl_tls.c
|
|
|
- *
|
|
|
- * This module is required for SSL/TLS up to version 1.1, and for TLS 1.2
|
|
|
- * depending on the handshake parameters. Further, it is used for checking
|
|
|
- * MD5-signed certificates, and for PBKDF1 when decrypting PEM-encoded
|
|
|
- * encrypted keys.
|
|
|
- *
|
|
|
- * \warning MD5 is considered a weak message digest and its use constitutes a
|
|
|
- * security risk. If possible, we recommend avoiding dependencies on
|
|
|
- * it, and considering stronger message digests instead.
|
|
|
- *
|
|
|
- */
|
|
|
-#define MBEDTLS_MD5_C
|
|
|
-
|
|
|
-/**
|
|
|
- * \def MBEDTLS_MEMORY_BUFFER_ALLOC_C
|
|
|
- *
|
|
|
- * Enable the buffer allocator implementation that makes use of a (stack)
|
|
|
- * based buffer to 'allocate' dynamic memory. (replaces calloc() and free()
|
|
|
- * calls)
|
|
|
- *
|
|
|
- * Module: library/memory_buffer_alloc.c
|
|
|
- *
|
|
|
- * Requires: MBEDTLS_PLATFORM_C
|
|
|
- * MBEDTLS_PLATFORM_MEMORY (to use it within mbed TLS)
|
|
|
- *
|
|
|
- * Enable this module to enable the buffer memory allocator.
|
|
|
- */
|
|
|
-//#define MBEDTLS_MEMORY_BUFFER_ALLOC_C
|
|
|
-
|
|
|
-/**
|
|
|
- * \def MBEDTLS_NET_C
|
|
|
- *
|
|
|
- * Enable the TCP and UDP over IPv6/IPv4 networking routines.
|
|
|
- *
|
|
|
- * \note This module only works on POSIX/Unix (including Linux, BSD and OS X)
|
|
|
- * and Windows. For other platforms, you'll want to disable it, and write your
|
|
|
- * own networking callbacks to be passed to \c mbedtls_ssl_set_bio().
|
|
|
- *
|
|
|
- * \note See also our Knowledge Base article about porting to a new
|
|
|
- * environment:
|
|
|
- * https://tls.mbed.org/kb/how-to/how-do-i-port-mbed-tls-to-a-new-environment-OS
|
|
|
- *
|
|
|
- * Module: library/net_sockets.c
|
|
|
- *
|
|
|
- * This module provides networking routines.
|
|
|
- */
|
|
|
-//#define MBEDTLS_NET_C
|
|
|
-
|
|
|
-/**
|
|
|
- * \def MBEDTLS_OID_C
|
|
|
- *
|
|
|
- * Enable the OID database.
|
|
|
- *
|
|
|
- * Module: library/oid.c
|
|
|
- * Caller: library/asn1write.c
|
|
|
- * library/pkcs5.c
|
|
|
- * library/pkparse.c
|
|
|
- * library/pkwrite.c
|
|
|
- * library/rsa.c
|
|
|
- * library/x509.c
|
|
|
- * library/x509_create.c
|
|
|
- * library/x509_crl.c
|
|
|
- * library/x509_crt.c
|
|
|
- * library/x509_csr.c
|
|
|
- * library/x509write_crt.c
|
|
|
- * library/x509write_csr.c
|
|
|
- *
|
|
|
- * This modules translates between OIDs and internal values.
|
|
|
- */
|
|
|
-#define MBEDTLS_OID_C
|
|
|
-
|
|
|
-/**
|
|
|
- * \def MBEDTLS_PADLOCK_C
|
|
|
- *
|
|
|
- * Enable VIA Padlock support on x86.
|
|
|
- *
|
|
|
- * Module: library/padlock.c
|
|
|
- * Caller: library/aes.c
|
|
|
- *
|
|
|
- * Requires: MBEDTLS_HAVE_ASM
|
|
|
- *
|
|
|
- * This modules adds support for the VIA PadLock on x86.
|
|
|
- */
|
|
|
-//#define MBEDTLS_PADLOCK_C
|
|
|
-
|
|
|
-/**
|
|
|
- * \def MBEDTLS_PEM_PARSE_C
|
|
|
- *
|
|
|
- * Enable PEM decoding / parsing.
|
|
|
- *
|
|
|
- * Module: library/pem.c
|
|
|
- * Caller: library/dhm.c
|
|
|
- * library/pkparse.c
|
|
|
- * library/x509_crl.c
|
|
|
- * library/x509_crt.c
|
|
|
- * library/x509_csr.c
|
|
|
- *
|
|
|
- * Requires: MBEDTLS_BASE64_C
|
|
|
- *
|
|
|
- * This modules adds support for decoding / parsing PEM files.
|
|
|
- */
|
|
|
-#define MBEDTLS_PEM_PARSE_C
|
|
|
-
|
|
|
-/**
|
|
|
- * \def MBEDTLS_PEM_WRITE_C
|
|
|
- *
|
|
|
- * Enable PEM encoding / writing.
|
|
|
- *
|
|
|
- * Module: library/pem.c
|
|
|
- * Caller: library/pkwrite.c
|
|
|
- * library/x509write_crt.c
|
|
|
- * library/x509write_csr.c
|
|
|
- *
|
|
|
- * Requires: MBEDTLS_BASE64_C
|
|
|
- *
|
|
|
- * This modules adds support for encoding / writing PEM files.
|
|
|
- */
|
|
|
-//#define MBEDTLS_PEM_WRITE_C
|
|
|
-
|
|
|
-/**
|
|
|
- * \def MBEDTLS_PK_C
|
|
|
- *
|
|
|
- * Enable the generic public (asymetric) key layer.
|
|
|
- *
|
|
|
- * Module: library/pk.c
|
|
|
- * Caller: library/ssl_tls.c
|
|
|
- * library/ssl_cli.c
|
|
|
- * library/ssl_srv.c
|
|
|
- *
|
|
|
- * Requires: MBEDTLS_RSA_C or MBEDTLS_ECP_C
|
|
|
- *
|
|
|
- * Uncomment to enable generic public key wrappers.
|
|
|
- */
|
|
|
-#define MBEDTLS_PK_C
|
|
|
-
|
|
|
-/**
|
|
|
- * \def MBEDTLS_PK_PARSE_C
|
|
|
- *
|
|
|
- * Enable the generic public (asymetric) key parser.
|
|
|
- *
|
|
|
- * Module: library/pkparse.c
|
|
|
- * Caller: library/x509_crt.c
|
|
|
- * library/x509_csr.c
|
|
|
- *
|
|
|
- * Requires: MBEDTLS_PK_C
|
|
|
- *
|
|
|
- * Uncomment to enable generic public key parse functions.
|
|
|
- */
|
|
|
-#define MBEDTLS_PK_PARSE_C
|
|
|
-
|
|
|
-/**
|
|
|
- * \def MBEDTLS_PK_WRITE_C
|
|
|
- *
|
|
|
- * Enable the generic public (asymetric) key writer.
|
|
|
- *
|
|
|
- * Module: library/pkwrite.c
|
|
|
- * Caller: library/x509write.c
|
|
|
- *
|
|
|
- * Requires: MBEDTLS_PK_C
|
|
|
- *
|
|
|
- * Uncomment to enable generic public key write functions.
|
|
|
- */
|
|
|
-//#define MBEDTLS_PK_WRITE_C
|
|
|
-
|
|
|
-/**
|
|
|
- * \def MBEDTLS_PKCS5_C
|
|
|
- *
|
|
|
- * Enable PKCS#5 functions.
|
|
|
- *
|
|
|
- * Module: library/pkcs5.c
|
|
|
- *
|
|
|
- * Requires: MBEDTLS_MD_C
|
|
|
- *
|
|
|
- * This module adds support for the PKCS#5 functions.
|
|
|
- */
|
|
|
-// #define MBEDTLS_PKCS5_C
|
|
|
-
|
|
|
-/**
|
|
|
- * \def MBEDTLS_PKCS11_C
|
|
|
- *
|
|
|
- * Enable wrapper for PKCS#11 smartcard support.
|
|
|
- *
|
|
|
- * Module: library/pkcs11.c
|
|
|
- * Caller: library/pk.c
|
|
|
- *
|
|
|
- * Requires: MBEDTLS_PK_C
|
|
|
- *
|
|
|
- * This module enables SSL/TLS PKCS #11 smartcard support.
|
|
|
- * Requires the presence of the PKCS#11 helper library (libpkcs11-helper)
|
|
|
- */
|
|
|
-//#define MBEDTLS_PKCS11_C
|
|
|
-
|
|
|
-/**
|
|
|
- * \def MBEDTLS_PKCS12_C
|
|
|
- *
|
|
|
- * Enable PKCS#12 PBE functions.
|
|
|
- * Adds algorithms for parsing PKCS#8 encrypted private keys
|
|
|
- *
|
|
|
- * Module: library/pkcs12.c
|
|
|
- * Caller: library/pkparse.c
|
|
|
- *
|
|
|
- * Requires: MBEDTLS_ASN1_PARSE_C, MBEDTLS_CIPHER_C, MBEDTLS_MD_C
|
|
|
- * Can use: MBEDTLS_ARC4_C
|
|
|
- *
|
|
|
- * This module enables PKCS#12 functions.
|
|
|
- */
|
|
|
-//#define MBEDTLS_PKCS12_C
|
|
|
-
|
|
|
-/**
|
|
|
- * \def MBEDTLS_PLATFORM_C
|
|
|
- *
|
|
|
- * Enable the platform abstraction layer that allows you to re-assign
|
|
|
- * functions like calloc(), free(), snprintf(), printf(), fprintf(), exit().
|
|
|
- *
|
|
|
- * Enabling MBEDTLS_PLATFORM_C enables to use of MBEDTLS_PLATFORM_XXX_ALT
|
|
|
- * or MBEDTLS_PLATFORM_XXX_MACRO directives, allowing the functions mentioned
|
|
|
- * above to be specified at runtime or compile time respectively.
|
|
|
- *
|
|
|
- * \note This abstraction layer must be enabled on Windows (including MSYS2)
|
|
|
- * as other module rely on it for a fixed snprintf implementation.
|
|
|
- *
|
|
|
- * Module: library/platform.c
|
|
|
- * Caller: Most other .c files
|
|
|
- *
|
|
|
- * This module enables abstraction of common (libc) functions.
|
|
|
- */
|
|
|
-#define MBEDTLS_PLATFORM_C
|
|
|
-
|
|
|
-/**
|
|
|
- * \def MBEDTLS_RIPEMD160_C
|
|
|
- *
|
|
|
- * Enable the RIPEMD-160 hash algorithm.
|
|
|
- *
|
|
|
- * Module: library/ripemd160.c
|
|
|
- * Caller: library/md.c
|
|
|
- *
|
|
|
- */
|
|
|
-//#define MBEDTLS_RIPEMD160_C
|
|
|
-
|
|
|
-/**
|
|
|
- * \def MBEDTLS_RSA_C
|
|
|
- *
|
|
|
- * Enable the RSA public-key cryptosystem.
|
|
|
- *
|
|
|
- * Module: library/rsa.c
|
|
|
- * library/rsa_internal.c
|
|
|
- * Caller: library/ssl_cli.c
|
|
|
- * library/ssl_srv.c
|
|
|
- * library/ssl_tls.c
|
|
|
- * library/x509.c
|
|
|
- *
|
|
|
- * This module is used by the following key exchanges:
|
|
|
- * RSA, DHE-RSA, ECDHE-RSA, RSA-PSK
|
|
|
- *
|
|
|
- * Requires: MBEDTLS_BIGNUM_C, MBEDTLS_OID_C
|
|
|
- */
|
|
|
-#define MBEDTLS_RSA_C
|
|
|
-
|
|
|
-/**
|
|
|
- * \def MBEDTLS_SHA1_C
|
|
|
- *
|
|
|
- * Enable the SHA1 cryptographic hash algorithm.
|
|
|
- *
|
|
|
- * Module: library/sha1.c
|
|
|
- * Caller: library/md.c
|
|
|
- * library/ssl_cli.c
|
|
|
- * library/ssl_srv.c
|
|
|
- * library/ssl_tls.c
|
|
|
- * library/x509write_crt.c
|
|
|
- *
|
|
|
- * This module is required for SSL/TLS up to version 1.1, for TLS 1.2
|
|
|
- * depending on the handshake parameters, and for SHA1-signed certificates.
|
|
|
- *
|
|
|
- * \warning SHA-1 is considered a weak message digest and its use constitutes
|
|
|
- * a security risk. If possible, we recommend avoiding dependencies
|
|
|
- * on it, and considering stronger message digests instead.
|
|
|
- *
|
|
|
- */
|
|
|
-#define MBEDTLS_SHA1_C
|
|
|
-
|
|
|
-/**
|
|
|
- * \def MBEDTLS_SHA256_C
|
|
|
- *
|
|
|
- * Enable the SHA-224 and SHA-256 cryptographic hash algorithms.
|
|
|
- *
|
|
|
- * Module: library/sha256.c
|
|
|
- * Caller: library/entropy.c
|
|
|
- * library/md.c
|
|
|
- * library/ssl_cli.c
|
|
|
- * library/ssl_srv.c
|
|
|
- * library/ssl_tls.c
|
|
|
- *
|
|
|
- * This module adds support for SHA-224 and SHA-256.
|
|
|
- * This module is required for the SSL/TLS 1.2 PRF function.
|
|
|
- */
|
|
|
-#define MBEDTLS_SHA256_C
|
|
|
-#define MBEDTLS_SHA224_C
|
|
|
-
|
|
|
-/**
|
|
|
- * \def MBEDTLS_SHA512_C
|
|
|
- *
|
|
|
- * Enable the SHA-384 and SHA-512 cryptographic hash algorithms.
|
|
|
- *
|
|
|
- * Module: library/sha512.c
|
|
|
- * Caller: library/entropy.c
|
|
|
- * library/md.c
|
|
|
- * library/ssl_cli.c
|
|
|
- * library/ssl_srv.c
|
|
|
- *
|
|
|
- * This module adds support for SHA-384 and SHA-512.
|
|
|
- */
|
|
|
-// #define MBEDTLS_SHA512_C
|
|
|
-
|
|
|
-/**
|
|
|
- * \def MBEDTLS_SSL_CACHE_C
|
|
|
- *
|
|
|
- * Enable simple SSL cache implementation.
|
|
|
- *
|
|
|
- * Module: library/ssl_cache.c
|
|
|
- * Caller:
|
|
|
- *
|
|
|
- * Requires: MBEDTLS_SSL_CACHE_C
|
|
|
- */
|
|
|
-//#define MBEDTLS_SSL_CACHE_C
|
|
|
-
|
|
|
-/**
|
|
|
- * \def MBEDTLS_SSL_COOKIE_C
|
|
|
- *
|
|
|
- * Enable basic implementation of DTLS cookies for hello verification.
|
|
|
- *
|
|
|
- * Module: library/ssl_cookie.c
|
|
|
- * Caller:
|
|
|
- */
|
|
|
-//#define MBEDTLS_SSL_COOKIE_C
|
|
|
-
|
|
|
-/**
|
|
|
- * \def MBEDTLS_SSL_TICKET_C
|
|
|
- *
|
|
|
- * Enable an implementation of TLS server-side callbacks for session tickets.
|
|
|
- *
|
|
|
- * Module: library/ssl_ticket.c
|
|
|
- * Caller:
|
|
|
- *
|
|
|
- * Requires: MBEDTLS_CIPHER_C
|
|
|
- */
|
|
|
-//#define MBEDTLS_SSL_TICKET_C
|
|
|
-
|
|
|
-/**
|
|
|
- * \def MBEDTLS_SSL_CLI_C
|
|
|
- *
|
|
|
- * Enable the SSL/TLS client code.
|
|
|
- *
|
|
|
- * Module: library/ssl_cli.c
|
|
|
- * Caller:
|
|
|
- *
|
|
|
- * Requires: MBEDTLS_SSL_TLS_C
|
|
|
- *
|
|
|
- * This module is required for SSL/TLS client support.
|
|
|
- */
|
|
|
-#define MBEDTLS_SSL_CLI_C
|
|
|
-
|
|
|
-/**
|
|
|
- * \def MBEDTLS_SSL_SRV_C
|
|
|
- *
|
|
|
- * Enable the SSL/TLS server code.
|
|
|
- *
|
|
|
- * Module: library/ssl_srv.c
|
|
|
- * Caller:
|
|
|
- *
|
|
|
- * Requires: MBEDTLS_SSL_TLS_C
|
|
|
- *
|
|
|
- * This module is required for SSL/TLS server support.
|
|
|
- */
|
|
|
-// #define MBEDTLS_SSL_SRV_C
|
|
|
-
|
|
|
-/**
|
|
|
- * \def MBEDTLS_SSL_TLS_C
|
|
|
- *
|
|
|
- * Enable the generic SSL/TLS code.
|
|
|
- *
|
|
|
- * Module: library/ssl_tls.c
|
|
|
- * Caller: library/ssl_cli.c
|
|
|
- * library/ssl_srv.c
|
|
|
- *
|
|
|
- * Requires: MBEDTLS_CIPHER_C, MBEDTLS_MD_C
|
|
|
- * and at least one of the MBEDTLS_SSL_PROTO_XXX defines
|
|
|
- *
|
|
|
- * This module is required for SSL/TLS.
|
|
|
- */
|
|
|
-#define MBEDTLS_SSL_TLS_C
|
|
|
-
|
|
|
-/**
|
|
|
- * \def MBEDTLS_THREADING_C
|
|
|
- *
|
|
|
- * Enable the threading abstraction layer.
|
|
|
- * By default mbed TLS assumes it is used in a non-threaded environment or that
|
|
|
- * contexts are not shared between threads. If you do intend to use contexts
|
|
|
- * between threads, you will need to enable this layer to prevent race
|
|
|
- * conditions. See also our Knowledge Base article about threading:
|
|
|
- * https://tls.mbed.org/kb/development/thread-safety-and-multi-threading
|
|
|
- *
|
|
|
- * Module: library/threading.c
|
|
|
- *
|
|
|
- * This allows different threading implementations (self-implemented or
|
|
|
- * provided).
|
|
|
- *
|
|
|
- * You will have to enable either MBEDTLS_THREADING_ALT or
|
|
|
- * MBEDTLS_THREADING_PTHREAD.
|
|
|
- *
|
|
|
- * Enable this layer to allow use of mutexes within mbed TLS
|
|
|
- */
|
|
|
-//#define MBEDTLS_THREADING_C
|
|
|
-
|
|
|
-/**
|
|
|
- * \def MBEDTLS_TIMING_C
|
|
|
- *
|
|
|
- * Enable the semi-portable timing interface.
|
|
|
- *
|
|
|
- * \note The provided implementation only works on POSIX/Unix (including Linux,
|
|
|
- * BSD and OS X) and Windows. On other platforms, you can either disable that
|
|
|
- * module and provide your own implementations of the callbacks needed by
|
|
|
- * \c mbedtls_ssl_set_timer_cb() for DTLS, or leave it enabled and provide
|
|
|
- * your own implementation of the whole module by setting
|
|
|
- * \c MBEDTLS_TIMING_ALT in the current file.
|
|
|
- *
|
|
|
- * \note See also our Knowledge Base article about porting to a new
|
|
|
- * environment:
|
|
|
- * https://tls.mbed.org/kb/how-to/how-do-i-port-mbed-tls-to-a-new-environment-OS
|
|
|
- *
|
|
|
- * Module: library/timing.c
|
|
|
- * Caller: library/havege.c
|
|
|
- *
|
|
|
- * This module is used by the HAVEGE random number generator.
|
|
|
- */
|
|
|
-//#define MBEDTLS_TIMING_C
|
|
|
-
|
|
|
-/**
|
|
|
- * \def MBEDTLS_VERSION_C
|
|
|
- *
|
|
|
- * Enable run-time version information.
|
|
|
- *
|
|
|
- * Module: library/version.c
|
|
|
- *
|
|
|
- * This module provides run-time version information.
|
|
|
- */
|
|
|
-//#define MBEDTLS_VERSION_C
|
|
|
-
|
|
|
-/**
|
|
|
- * \def MBEDTLS_X509_USE_C
|
|
|
- *
|
|
|
- * Enable X.509 core for using certificates.
|
|
|
- *
|
|
|
- * Module: library/x509.c
|
|
|
- * Caller: library/x509_crl.c
|
|
|
- * library/x509_crt.c
|
|
|
- * library/x509_csr.c
|
|
|
- *
|
|
|
- * Requires: MBEDTLS_ASN1_PARSE_C, MBEDTLS_BIGNUM_C, MBEDTLS_OID_C,
|
|
|
- * MBEDTLS_PK_PARSE_C
|
|
|
- *
|
|
|
- * This module is required for the X.509 parsing modules.
|
|
|
- */
|
|
|
-#define MBEDTLS_X509_USE_C
|
|
|
-
|
|
|
-/**
|
|
|
- * \def MBEDTLS_X509_CRT_PARSE_C
|
|
|
- *
|
|
|
- * Enable X.509 certificate parsing.
|
|
|
- *
|
|
|
- * Module: library/x509_crt.c
|
|
|
- * Caller: library/ssl_cli.c
|
|
|
- * library/ssl_srv.c
|
|
|
- * library/ssl_tls.c
|
|
|
- *
|
|
|
- * Requires: MBEDTLS_X509_USE_C
|
|
|
- *
|
|
|
- * This module is required for X.509 certificate parsing.
|
|
|
- */
|
|
|
-#define MBEDTLS_X509_CRT_PARSE_C
|
|
|
-
|
|
|
-/**
|
|
|
- * \def MBEDTLS_X509_CRL_PARSE_C
|
|
|
- *
|
|
|
- * Enable X.509 CRL parsing.
|
|
|
- *
|
|
|
- * Module: library/x509_crl.c
|
|
|
- * Caller: library/x509_crt.c
|
|
|
- *
|
|
|
- * Requires: MBEDTLS_X509_USE_C
|
|
|
- *
|
|
|
- * This module is required for X.509 CRL parsing.
|
|
|
- */
|
|
|
-//#define MBEDTLS_X509_CRL_PARSE_C
|
|
|
-
|
|
|
-/**
|
|
|
- * \def MBEDTLS_X509_CSR_PARSE_C
|
|
|
- *
|
|
|
- * Enable X.509 Certificate Signing Request (CSR) parsing.
|
|
|
- *
|
|
|
- * Module: library/x509_csr.c
|
|
|
- * Caller: library/x509_crt_write.c
|
|
|
- *
|
|
|
- * Requires: MBEDTLS_X509_USE_C
|
|
|
- *
|
|
|
- * This module is used for reading X.509 certificate request.
|
|
|
- */
|
|
|
-//#define MBEDTLS_X509_CSR_PARSE_C
|
|
|
-
|
|
|
-/**
|
|
|
- * \def MBEDTLS_X509_CREATE_C
|
|
|
- *
|
|
|
- * Enable X.509 core for creating certificates.
|
|
|
- *
|
|
|
- * Module: library/x509_create.c
|
|
|
- *
|
|
|
- * Requires: MBEDTLS_BIGNUM_C, MBEDTLS_OID_C, MBEDTLS_PK_WRITE_C
|
|
|
- *
|
|
|
- * This module is the basis for creating X.509 certificates and CSRs.
|
|
|
- */
|
|
|
-//#define MBEDTLS_X509_CREATE_C
|
|
|
-
|
|
|
-/**
|
|
|
- * \def MBEDTLS_X509_CRT_WRITE_C
|
|
|
- *
|
|
|
- * Enable creating X.509 certificates.
|
|
|
- *
|
|
|
- * Module: library/x509_crt_write.c
|
|
|
- *
|
|
|
- * Requires: MBEDTLS_X509_CREATE_C
|
|
|
- *
|
|
|
- * This module is required for X.509 certificate creation.
|
|
|
- */
|
|
|
-//#define MBEDTLS_X509_CRT_WRITE_C
|
|
|
-
|
|
|
-/**
|
|
|
- * \def MBEDTLS_X509_CSR_WRITE_C
|
|
|
- *
|
|
|
- * Enable creating X.509 Certificate Signing Requests (CSR).
|
|
|
- *
|
|
|
- * Module: library/x509_csr_write.c
|
|
|
- *
|
|
|
- * Requires: MBEDTLS_X509_CREATE_C
|
|
|
- *
|
|
|
- * This module is required for X.509 certificate request writing.
|
|
|
- */
|
|
|
-//#define MBEDTLS_X509_CSR_WRITE_C
|
|
|
-
|
|
|
-/**
|
|
|
- * \def MBEDTLS_XTEA_C
|
|
|
- *
|
|
|
- * Enable the XTEA block cipher.
|
|
|
- *
|
|
|
- * Module: library/xtea.c
|
|
|
- * Caller:
|
|
|
- */
|
|
|
-//#define MBEDTLS_XTEA_C
|
|
|
-
|
|
|
-/* \} name SECTION: mbed TLS modules */
|
|
|
-
|
|
|
-/**
|
|
|
- * \name SECTION: Module configuration options
|
|
|
- *
|
|
|
- * This section allows for the setting of module specific sizes and
|
|
|
- * configuration options. The default values are already present in the
|
|
|
- * relevant header files and should suffice for the regular use cases.
|
|
|
- *
|
|
|
- * Our advice is to enable options and change their values here
|
|
|
- * only if you have a good reason and know the consequences.
|
|
|
- *
|
|
|
- * Please check the respective header file for documentation on these
|
|
|
- * parameters (to prevent duplicate documentation).
|
|
|
- * \{
|
|
|
- */
|
|
|
-
|
|
|
-/* MPI / BIGNUM options */
|
|
|
-//#define MBEDTLS_MPI_WINDOW_SIZE 6 /**< Maximum windows size used. */
|
|
|
-//#define MBEDTLS_MPI_MAX_SIZE 1024 /**< Maximum number of bytes for usable MPIs. */
|
|
|
-
|
|
|
-/* CTR_DRBG options */
|
|
|
-//#define MBEDTLS_CTR_DRBG_ENTROPY_LEN 48 /**< Amount of entropy used per seed by default (48 with SHA-512, 32 with SHA-256) */
|
|
|
-//#define MBEDTLS_CTR_DRBG_RESEED_INTERVAL 10000 /**< Interval before reseed is performed by default */
|
|
|
-//#define MBEDTLS_CTR_DRBG_MAX_INPUT 256 /**< Maximum number of additional input bytes */
|
|
|
-//#define MBEDTLS_CTR_DRBG_MAX_REQUEST 1024 /**< Maximum number of requested bytes per call */
|
|
|
-//#define MBEDTLS_CTR_DRBG_MAX_SEED_INPUT 384 /**< Maximum size of (re)seed buffer */
|
|
|
-
|
|
|
-/* HMAC_DRBG options */
|
|
|
-//#define MBEDTLS_HMAC_DRBG_RESEED_INTERVAL 10000 /**< Interval before reseed is performed by default */
|
|
|
-//#define MBEDTLS_HMAC_DRBG_MAX_INPUT 256 /**< Maximum number of additional input bytes */
|
|
|
-//#define MBEDTLS_HMAC_DRBG_MAX_REQUEST 1024 /**< Maximum number of requested bytes per call */
|
|
|
-//#define MBEDTLS_HMAC_DRBG_MAX_SEED_INPUT 384 /**< Maximum size of (re)seed buffer */
|
|
|
-
|
|
|
-/* ECP options */
|
|
|
-//#define MBEDTLS_ECP_MAX_BITS 521 /**< Maximum bit size of groups */
|
|
|
-//#define MBEDTLS_ECP_WINDOW_SIZE 6 /**< Maximum window size used */
|
|
|
-//#define MBEDTLS_ECP_FIXED_POINT_OPTIM 1 /**< Enable fixed-point speed-up */
|
|
|
-
|
|
|
-/* Entropy options */
|
|
|
-//#define MBEDTLS_ENTROPY_MAX_SOURCES 20 /**< Maximum number of sources supported */
|
|
|
-//#define MBEDTLS_ENTROPY_MAX_GATHER 128 /**< Maximum amount requested from entropy sources */
|
|
|
-//#define MBEDTLS_ENTROPY_MIN_HARDWARE 32 /**< Default minimum number of bytes required for the hardware entropy source mbedtls_hardware_poll() before entropy is released */
|
|
|
-
|
|
|
-/* Memory buffer allocator options */
|
|
|
-//#define MBEDTLS_MEMORY_ALIGN_MULTIPLE 4 /**< Align on multiples of this value */
|
|
|
-void tls_mem_free2(void* p);
|
|
|
-/* Platform options */
|
|
|
-//#define MBEDTLS_PLATFORM_STD_MEM_HDR <stdlib.h> /**< Header to include if MBEDTLS_PLATFORM_NO_STD_FUNCTIONS is defined. Don't define if no header is needed. */
|
|
|
-// #define MBEDTLS_PLATFORM_STD_CALLOC tls_mem_calloc /**< Default allocator to use, can be undefined */
|
|
|
-// #define MBEDTLS_PLATFORM_STD_FREE tls_mem_free2 /**< Default free to use, can be undefined */
|
|
|
-//#define MBEDTLS_PLATFORM_STD_EXIT exit /**< Default exit to use, can be undefined */
|
|
|
-//#define MBEDTLS_PLATFORM_STD_TIME tls_os_get_time /**< Default time to use, can be undefined. MBEDTLS_HAVE_TIME must be enabled */
|
|
|
-//#define MBEDTLS_PLATFORM_STD_FPRINTF fprintf /**< Default fprintf to use, can be undefined */
|
|
|
-//#define MBEDTLS_PLATFORM_STD_PRINTF printf /**< Default printf to use, can be undefined */
|
|
|
-/* Note: your snprintf must correclty zero-terminate the buffer! */
|
|
|
-//#define MBEDTLS_PLATFORM_STD_SNPRINTF snprintf /**< Default snprintf to use, can be undefined */
|
|
|
-//#define MBEDTLS_PLATFORM_STD_EXIT_SUCCESS 0 /**< Default exit value to use, can be undefined */
|
|
|
-//#define MBEDTLS_PLATFORM_STD_EXIT_FAILURE 1 /**< Default exit value to use, can be undefined */
|
|
|
-//#define MBEDTLS_PLATFORM_STD_NV_SEED_READ mbedtls_platform_std_nv_seed_read /**< Default nv_seed_read function to use, can be undefined */
|
|
|
-//#define MBEDTLS_PLATFORM_STD_NV_SEED_WRITE mbedtls_platform_std_nv_seed_write /**< Default nv_seed_write function to use, can be undefined */
|
|
|
-//#define MBEDTLS_PLATFORM_STD_NV_SEED_FILE "seedfile" /**< Seed file to read/write with default implementation */
|
|
|
-
|
|
|
-/* To Use Function Macros MBEDTLS_PLATFORM_C must be enabled */
|
|
|
-/* MBEDTLS_PLATFORM_XXX_MACRO and MBEDTLS_PLATFORM_XXX_ALT cannot both be defined */
|
|
|
-//#define MBEDTLS_PLATFORM_CALLOC_MACRO calloc /**< Default allocator macro to use, can be undefined */
|
|
|
-//#define MBEDTLS_PLATFORM_FREE_MACRO free /**< Default free macro to use, can be undefined */
|
|
|
-//#define MBEDTLS_PLATFORM_EXIT_MACRO exit /**< Default exit macro to use, can be undefined */
|
|
|
-//#define MBEDTLS_PLATFORM_TIME_MACRO time /**< Default time macro to use, can be undefined. MBEDTLS_HAVE_TIME must be enabled */
|
|
|
-//#define MBEDTLS_PLATFORM_TIME_TYPE_MACRO time_t /**< Default time macro to use, can be undefined. MBEDTLS_HAVE_TIME must be enabled */
|
|
|
-//#define MBEDTLS_PLATFORM_FPRINTF_MACRO fprintf /**< Default fprintf macro to use, can be undefined */
|
|
|
-//#define MBEDTLS_PLATFORM_PRINTF_MACRO printf /**< Default printf macro to use, can be undefined */
|
|
|
-/* Note: your snprintf must correclty zero-terminate the buffer! */
|
|
|
-//#define MBEDTLS_PLATFORM_SNPRINTF_MACRO snprintf /**< Default snprintf macro to use, can be undefined */
|
|
|
-//#define MBEDTLS_PLATFORM_NV_SEED_READ_MACRO mbedtls_platform_std_nv_seed_read /**< Default nv_seed_read function to use, can be undefined */
|
|
|
-//#define MBEDTLS_PLATFORM_NV_SEED_WRITE_MACRO mbedtls_platform_std_nv_seed_write /**< Default nv_seed_write function to use, can be undefined */
|
|
|
-
|
|
|
-/* SSL Cache options */
|
|
|
-//#define MBEDTLS_SSL_CACHE_DEFAULT_TIMEOUT 86400 /**< 1 day */
|
|
|
-//#define MBEDTLS_SSL_CACHE_DEFAULT_MAX_ENTRIES 50 /**< Maximum entries in cache */
|
|
|
-
|
|
|
-/* SSL options */
|
|
|
-// #define MBEDTLS_SSL_MAX_CONTENT_LEN 16384//8192 /**< Maxium fragment length in bytes, determines the size of each of the two internal I/O buffers. Especially when you encounter 0x7200 error, you can try to change it to a maximum of 16384 */
|
|
|
-//#define MBEDTLS_SSL_DEFAULT_TICKET_LIFETIME 86400 /**< Lifetime of session tickets (if enabled) */
|
|
|
-//#define MBEDTLS_PSK_MAX_LEN 32 /**< Max size of TLS pre-shared keys, in bytes (default 256 bits) */
|
|
|
-//#define MBEDTLS_SSL_COOKIE_TIMEOUT 60 /**< Default expiration delay of DTLS cookies, in seconds if HAVE_TIME, or in number of cookies issued */
|
|
|
-
|
|
|
-/**
|
|
|
- * Complete list of ciphersuites to use, in order of preference.
|
|
|
- *
|
|
|
- * \warning No dependency checking is done on that field! This option can only
|
|
|
- * be used to restrict the set of available ciphersuites. It is your
|
|
|
- * responsibility to make sure the needed modules are active.
|
|
|
- *
|
|
|
- * Use this to save a few hundred bytes of ROM (default ordering of all
|
|
|
- * available ciphersuites) and a few to a few hundred bytes of RAM.
|
|
|
- *
|
|
|
- * The value below is only an example, not the default.
|
|
|
- */
|
|
|
-//#define MBEDTLS_SSL_CIPHERSUITES MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384,MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256
|
|
|
-
|
|
|
-/* X509 options */
|
|
|
-//#define MBEDTLS_X509_MAX_INTERMEDIATE_CA 8 /**< Maximum number of intermediate CAs in a verification chain. */
|
|
|
-//#define MBEDTLS_X509_MAX_FILE_PATH_LEN 512 /**< Maximum length of a path/filename string in bytes including the null terminator character ('\0'). */
|
|
|
-
|
|
|
-/**
|
|
|
- * Allow SHA-1 in the default TLS configuration for certificate signing.
|
|
|
- * Without this build-time option, SHA-1 support must be activated explicitly
|
|
|
- * through mbedtls_ssl_conf_cert_profile. Turning on this option is not
|
|
|
- * recommended because of it is possible to generate SHA-1 collisions, however
|
|
|
- * this may be safe for legacy infrastructure where additional controls apply.
|
|
|
- *
|
|
|
- * \warning SHA-1 is considered a weak message digest and its use constitutes
|
|
|
- * a security risk. If possible, we recommend avoiding dependencies
|
|
|
- * on it, and considering stronger message digests instead.
|
|
|
- *
|
|
|
- */
|
|
|
-// #define MBEDTLS_TLS_DEFAULT_ALLOW_SHA1_IN_CERTIFICATES
|
|
|
-
|
|
|
-/**
|
|
|
- * Allow SHA-1 in the default TLS configuration for TLS 1.2 handshake
|
|
|
- * signature and ciphersuite selection. Without this build-time option, SHA-1
|
|
|
- * support must be activated explicitly through mbedtls_ssl_conf_sig_hashes.
|
|
|
- * The use of SHA-1 in TLS <= 1.1 and in HMAC-SHA-1 is always allowed by
|
|
|
- * default. At the time of writing, there is no practical attack on the use
|
|
|
- * of SHA-1 in handshake signatures, hence this option is turned on by default
|
|
|
- * to preserve compatibility with existing peers, but the general
|
|
|
- * warning applies nonetheless:
|
|
|
- *
|
|
|
- * \warning SHA-1 is considered a weak message digest and its use constitutes
|
|
|
- * a security risk. If possible, we recommend avoiding dependencies
|
|
|
- * on it, and considering stronger message digests instead.
|
|
|
- *
|
|
|
- */
|
|
|
-// #define MBEDTLS_TLS_DEFAULT_ALLOW_SHA1_IN_KEY_EXCHANGE
|
|
|
-
|
|
|
-/* \} name SECTION: Customisation configuration options */
|
|
|
-
|
|
|
-/*
|
|
|
- * Allow user to override any previous default.
|
|
|
- */
|
|
|
-#if defined(MBEDTLS_USER_CONFIG_FILE)
|
|
|
-#include MBEDTLS_USER_CONFIG_FILE
|
|
|
-#endif
|
|
|
-
|
|
|
-#include "mbedtls/check_config.h"
|
|
|
-
|
|
|
-#endif /* MBEDTLS_CONFIG_H */
|
Wendal Chen